Hobart D340 manual Operation, ELECTRO-MECHANICAL Timer Controls when equipped

OPERATION

WARNING: MOVING BEATER IN BOWL, KEEP HANDS, CLOTHING, AND UTENSILS OUT WHILE IN OPERATION, DO NOT USE WITHOUT INTERLOCKED GUARD.

Every D340 mixer is equipped with either an Electro-Mechanical Timer Control (described at the bottom of this page) or a Programmable Timer Controller (described on pages 6 – 8). Also, become familiar with the other operating parts (Fig. 2) and their functions, which are referenced throughout the OPERATION section (pages 5 – 11).

The Bowl Guard must be in position or the mixer will not operate. Refer to page 10.

If the Bowl Support is not all the way up, the mixer will not operate unless the START button is held in.

	Controls
Attachment Hub
				Bowl Lift Handle
Bowl Guard			Drip Cup
			Apron
Agitator
		Bowl Handle

Alignment Pin

Bowl Clamp

Bowl

Bowl Support

PL-40144-1

Fig. 2

ELECTRO-MECHANICAL TIMER CONTROLS (when equipped)

The START button is used to start the mixer.

The STOP button is used to stop the mixer.

The TIMER is used in conjunction with the START button for timed mixing operations and will stop the mixer when a preset time has elapsed.

For non-timed mixing — Set the timer on HOLD and use the STOP button to stop the mixer.

Gear Shift Lever	Start Button
	Stop Button
	Timer
		PL-40142-1

Fig. 3

– 5 –