Emerson Process Management ES30 owner manual To Operate The Sleep Timer, Notes

Models: ES30

1 44
Download 44 pages 21.72 Kb
Page 31
Image 31
Sleep Timer

Sleep Timer

This system includes a programmable Sleep Timer that allows you to fall asleep to between 90 and 10 minutes of music and then shuts the power ‘Off’automatically.

To Operate The Sleep Timer:

1.) Turn the system ‘On’and operate either the Tuner or CD function as usual.

2.) Adjust the VOLUME controls to the desired level. Remember that the level you select for the sleep to music function is the same level you will hear when the timer turns the system on in the morning.

3.) Press the SLEEP button on the front panel or the remote control once.

4.) The display will show “90” indicating that the sleep timer will shut the power ‘Off’after 90 minutes.

The SLEEP indicator begins flashing.

Continue pressing the SLEEP button to decrease the amount of sleep timer operation. Each time you press the SLEEP button you reduce the sleep time by 10 minutes.

Release the SLEEP button when the display shows the desired amount of Sleep timer operation.

5.) After a few seconds the Sleep Time display disappears and the SLEEP indicator remains ‘On’.

When the Sleep Timer counts down to “00”, the power shuts ‘Off’automatically.

Notes:

You can shut the unit off manually before the Sleep Timer counts down to “00” by pressing the To Operate The Sleep Timer: POWER/STANDBY button at any time.

Remember that if you are falling asleep to CD you will also wake to CD, and if you fall asleep to the Tuner you will also wake to the Tuner.

If you are falling asleep to CD, the system will only operate until the CD ends. If you set the Sleep Timer for 90 minutes but your CD is only 45 minutes long, the music will stop after 45 minutes.

30

ES30_072905.p65

30

29/7/2005, 16:41

Page 31
Image 31
Emerson Process Management ES30 owner manual To Operate The Sleep Timer, Notes