Programmed Playback
You can program up to 20 tracks on a disc to playback in any desired order. You may also program a specific track to play several times within the same program.
Note: The player cannot be programmed while a disc is playing. If a disc is playing press the 
STOP/BAND button to stop playback before you begin the programming steps below.
1.) Press the CD/TUNER button on the remote control or CD button on front panel to select CD mode. Insert your disc in the player, close the door, and wait until the total track number and play time appear in the display.
2.) Press the MEMORY button once.
The MEMORY Indicator flashes and program memory “P- 01”, Track “01” appears in the display.
3.) Use the 
or 
buttons to select the first track to be programmed.
Example: Track “07”.
4.) When track number “07” appears in the display, press the MEMORY button once again to enter the track “07” in program memory number “01”.
The track number returns to
“00 ” a n d t h e p r o g r a m memory advances to “P- 02”
indicating that you may now select a track to be entered in program memory number “02”.
5.) Use the 
or 
buttons to select the next track to be programmed. When the desired track number appears in the display press the MEMORY button again to enter that track in the program memory.
6.) Repeat Step 5 until you have entered up to 20 tracks in the program memory.
26
ES30_072905.p65 | 26 |
29/7/2005, 16:41
