Emerson Process Management ES30 owner manual Resetting The System Computer

Resetting The System Computer

This system is equipped with a special circuit designed to protect the internal computer from permanent damage due to unexpected power surges.

If you find that the system does not respond to any commands from the front panel controls or the remote handset, the system probably experienced a sudden power surge that activated the protection circuit.

To reset the system after a power surge use the point of a pencil, a toothpick, a straightened paper-clip or similar object to press the RESET button which is located in a small opening on the back of unit.

The system will return to the Standby (Power Off) mode.

Note: Resetting the system computer also clears all of the system memory and returns the system to its original factory default settings. All of the preset tuner memories, the clock and the timer settings will be erased after you press the RESET button.

It will be necessary to re-enter the stations in the tuner preset memories, reset the clock and the timer settings.

33

ES30_072905.p65 33

29/7/2005, 16:41