Interex MACh Speed G3 quick start reset button, Removing the CPU card

5.Remove the CPU card that’s in the computer now.

•Pull the card straight up without rocking it side-to-side. Do not pull on the heat sink because you may damage the card or your computer.

7.Remove the MACh Speed G3 from its protective package.

•Now that you are grounded, you can remove the MACh Speed from its protective package.

•Inspect the card for any irregularities or possible damage in shipment.

Inspecting the MACh Speed G3

Removing the CPU card

6.Reset the motherboard, by depressing the CUDA switch.

•Located directly below the CPU card slot lies the mother- board reset switch, or CUDA. it is a small red button.

•Depress this switch for 5 seconds with a small tool or pen point. failure to com- plete this instruction may cause the CPU not to be recognized when booted up for use.

reset button

Chapter 2 - Installing the MACh Speed G3 Upg	rade Car d	Chapter 2 - Installing the MACh Speed G3 Upg	rade Car d
Page 14			Page 15