Interex MACh Speed G3 quick start Remove the CPU card that’s in the computer now

4.Unlock th top chassis by rotating the two locking levers on the chassis

Unlocking the chassis

5.Using the plastic handle, lift the top chassis up ant to the side until it rests on your working surface, clearly revealing the CPU card.

6.Remove the CPU card that’s in the computer now.

•Grasp the edges of the card firmly and pull the card out of the slot.

•Pull the card straight up without rocking it side-to-side. Do not pull on the heat sink because you might damage the card or your computer.

Removing the CPU card

7.Reset the motherboard, by depressing the CUDA switch.

•Located directly above the CPU card slot at the back of the computer, lies the motherboard reset switch, or CUDA. it is a small red button.

CPU

Card

Swing the chassis to reveal the CPU card

•Depress this switch for 5 seconds with a small tool or pen point. fail- ure to complete this instruction may cause the CPU not to be rec- ognized when booted up for use.

reset button

Chapter 2 - Installing the MACh Speed G3 Upgrade Card

Page 34

Chapter 2 - Installing the MACh Speed G3 Upgrade Card

Page 35