Cisco Systems HIG880, C892FSPK9 On the splitter, Connecting the Data BRI Port to the Isdn Line

Chapter 3 Connecting the Router

Connecting a Data BRI Port

Although the following procedure shows a Cisco 888W data router, this procedure applies to all Cisco 880 series router with a Data BRI port.

To connect the Data BRI port to the ISDN service provider, follow these steps:

Step 1 Connect one end of the orange ISDN S/T cable to the Data BRI port on the router. Figure 3-5shows a Data BRI connection.

Figure 3-5 Connecting the Data BRI Port to the ISDN Line

1	2
	5

3

4

231991

6 7

8

		1	End of the ISDN S/T cable, which connects to	5	xDSL splitter (provided by the xDSL service
			the Data BRI port on the router		provider)
		2	Network termination 1 (NT1) box	6	Other end of the first unshielded Category 5
					cable, which connects to the telephone line
					port on the splitter
		3	Other end of the ISDN S/T cable, which	7	One end of the second unshielded Category 5
			connects to the S/T port on the NT1 box		cable, which connects to the
					telecommunication service port on the splitter
		4	One end of the first unshielded Category 5	8	Other end of the second unshielded
			cable, which connects to the U port on the		Category 5 cable, which connects to the wall
			NT1 box		jack
	Step 2	Connect the other end of the orange ISDN S/T cable to the S/T port on the NT1 box.
	Step 3	Connect the first unshielded Category 5 cable from the U port on the NT1 box to the telephone line port
		on the splitter.
	Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide
3-8					OL-16193-01