Cisco Systems HIG880, C892FSPK9, 861WGNPK9RF, 860 manual Installing the Router Ground Connection

Chapter 2 Installing the Router

Installing the Router

Installing the Router Ground Connection

The router must be connected to a reliable earth ground. Install the ground wire in accordance with local electrical safety standards.

•For NEC-compliant grounding, use size 14 AWG (2 mm2) or larger copper wire and a ring terminal with an inner diameter of 1/4 in. (5 to 7 mm).

•For EN/IEC 60950–compliant grounding, use size 18 AWG (1 mm2) or larger copper wire.

To install the ground connection, follow these steps:

Step 1 Strip one end of the ground wire to the length required for the ground lug or terminal. Step 2 Crimp the ground wire to the ground lug or ring terminal, using the wire crimper.

Step 3 Attach the ground lug or ring terminal to the chassis as shown in Figure 2-3. For a ground lug, use the provided two screws with captive locking washers. For a ring terminal, use one of the screws provided. Tighten the screws to a torque of 8 to 10 in-lb (0.9 to 1.1 N-m).

Figure 2-3 Chassis Ground Connection Using Ring Terminal

231981

1

1

Ring Terminal

Step 4 Connect the other end of the ground wire to a known reliable earth ground point at your site.

After you install and properly ground the router, you can connect the power wiring, the WAN and LAN cables, and the cables for administrative access as required for your installation.

Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide

2-6 OL-16193-01