12.Reinstall the auxiliary fan
•Lift the computer back to its upright position.
•Press and hold down the small button on the floor of the computer. Then slide the fan to the left, engaging the two plastic loops on the floor of the computer. When the fan is in place, the button pops up and secures it.
13.Plug the auxiliary fan (9500) into the connector on the main logic board. There is only one correct way to insert the plug. Notice that the notch on the plug must face up
•IMPORTANT: If the fan cannot close, so that both sides are latched, the CPU card is not fully inserted. Remove the card, and reinstall.
Reinstalling the fan (retaining clip on 8500) | Attaching the fan power to the logic board |
14. Lift the auxiliary fan back into place.
• IMPORTANT: If the fan cannot close, so that both sides are latched, the CPU card is not fully inserted. Remove the card, and reinstall.
| Lifting the auxiliary fan (retaining clip on 8500) |
Chapter 2 - Installing the MACh Speed G3 Upgrade Card | Chapter 2 - Installing the MACh Speed G3 Upgrade Card |
Page 28 | Page 29 |
