Emerson Process Management ES30 MUTE Button On Remote Control Only, PHONES Stereo Headphone Jack

Models: ES30

1 44
Download 44 pages 21.72 Kb
Page 16
Image 16
MUTE Button (On Remote Control Only)

MUTE Button (On Remote Control Only)

Press the MUTE button on the remotrol control to shut off the speakers temporarily, for example, to answer the telephone.

The sound stops and the “MUTE” indicator appears in the display.

Press the MUTE button again to cancel the mute function and restore the sound. The “MUTE” indicator disappears.

The mute function will also be canceled automatically by pressing the VOLUME  PHONES (Stereo Headphone) Jack or VOLUME Manual background buttons.

Manual background PHONES (Stereo Headphone) Jack

This system includes a stereo Manual background PHONES jack on the right side panel of the main unit. You may connect a set of stereo headphones, not included, to this jack for private listening without disturbing others.

The main speakers are automatically shut ‘Off’when headphones are connected to the Manual background PHONES jack.

Make sure that the plug from your headphones is fully inserted into the headphone jack. If the plug is not fully inserted the sound may be intermittent, or you may only hear sound from one side of the headphones.

Important: To prevent hearing damage always set the volume control to a low level before you connect the headphones. Then connect the headphones, put them on, and very gradually increase the volume to a comfortable listening level. Remember that CDs may contain both very soft and very loud passages. Adjust the volume to a comfortable level using a louder passage, so that you always know what the maximum level will be.

15

ES30_072905.p65

15

29/7/2005, 16:41

Page 16
Image 16
Emerson Process Management ES30 owner manual MUTE Button On Remote Control Only, PHONES Stereo Headphone Jack