Hobart D340 manual Factory Programmed Preset Times Preset Key Indicator 0100

Page 8

PROGRAMMABLE TIMER CONTROLLER (when equipped) continued

To Revise the Preset Mixing Times contained in P1 or P2 . . .

Each preset key has four preset time settings. The indicator above the number 1, 2, 3, or 4 and the P1 or P2 indicator light identify which preset time is being displayed.

-

P1

-01:00

-- - -

P2

1 2 3 4

 

Indicators above P1 and 1 indicate the first preset time contained in P1.

Beginning from the Idle display [ – – : – – ], press P1 or P2 to display the #1 preset mixing time. ( Pressing P1 or P2 again will display the next preset time, etc.)

Turn the KNOB to change the time for the indicated preset.

Press SAVE to retain the revised time and move to the next preset time. Repeat from for each preset time (1, 2, 3, and 4 contained in P1 or P2). Pressing CLEAR will retain the saved times and return to the Idle display [ – – : – – ].

The timer reverts to the Factory Programmed Preset Times after any power interruption:

Factory Programmed Preset Times

Preset Key

 

 

Indicator

 

 

 

 

 

 

 

1

2

3

4

 

 

 

 

 

P1

01:00

02:00

10:00

00:00

P2

02:00

01:00

05:00

03:00

 

 

 

 

 

– 8 –

Image 8
Contents D340 Mixers Model D340 Mixer Installation Model D340 Mixers GeneralUnpacking LocationCheck Rotation Three-Phase Machines Only Electrical DataELECTRO-MECHANICAL Timer Controls when equipped OperationFor Continuous Mixing Programmable Timer Controller when equippedUsing the Dial Timer to set the Mixing Time 0100 Factory Programmed Preset Times Preset Key Indicator 0100 Mixing Changing SpeedsBowl Lift To rotate the Wire Cage Assembly to the rear To remove the Wire Cage Assembly for cleaningTo reinstall the Wire Cage Assembly Bowl Guard FigLubrication MaintenanceCleaning Bowl Lift Slideways TroubleshootingService