TROUBLESHOOTING
To avoid a service call, check symptoms and related possible causes. If machine still does not operate properly, contact Service.
SYMPTOM | POSSIBLE CAUSE | |
No machine operation. | 1. | Blown fuse or tripped circuit breaker at power supply. |
|
|
|
Dishes not clean. | 1. | Insufficient wash water due to drain obstruction preventing |
|
| Overflow Pipe from seating. |
| 2. | Loss of water pressure due to pump obstruction. |
|
| DISCONNECT ELECTRICAL POWER SUPPLIES (BOTH |
|
| DISHWASHER AND HEATER) and drain tank. Check for any |
|
| obstruction at the pump intake. |
| 3. | Incorrect water temperature. Check circuit breaker to electric |
|
| heat supply. Check to see if heater is turned on. |
| 4. | Inadequate detergent supply. |
| 5. | Excessive mineral deposits throughout wash and rinse system. |
|
| Deliming may be nessessary. |
|
|
|
Spotting silverware, glasses, | 1. | Improperly loaded racks. |
and dishes. |
|
|
| 2. | Incorrect rinse water temperature. |
| 3. | Loss of water pressure due to pump obstruction. |
|
| DISCONNECT ELECTRICAL POWER SUPPLIES (BOTH |
|
| DISHWASHER AND HEATER) and drain tank. Check for any |
|
| obstruction at the pump intake. |
| 4. | Excessively hard water. |
| 5. | Incorrect detergent for water type. |
| 6. | Incorrect rinse additive for water type. |
| 7. | Incorrect concentration of detergent and/or rinse additive. |
– 11 –