Hobart AM14 ML-32614, AM14C ML-32615 manual Symptom Possible Cause

Page 19

SYMPTOM

POSSIBLE CAUSE

Inadequate rinse.

1.

Dirty line strainer causing reduced water flow. Turn off water supply,

 

 

remove strainer cap, withdraw and clean screen. Reassemble.

 

2.

Low supply line pressure.

 

3.

Excessive mineral deposits throughout wash and rinse system. Deliming

 

 

may be necessary.

 

4.

Incoming water temperature to booster (if applicable) below 120°F.

 

 

Extend wash cycle from 40 to 60 seconds.

 

 

 

Leaking valve (except solenoid

1.

Foreign material preventing proper valve operation. NOTE: A critical

type).

 

period is soon after installation when pipe compound or metal shavings

 

 

may lodge at the valve seat. Shut off supply line. Unscrew and lift

 

 

bonnet from valve body. Clean valve and reassemble.

 

2.

If a solenoid valve is malfunctioning, it is recommended that you contact

 

 

Service.

 

 

 

No wash tank heat.

1.

The machine is equipped with a low water safety device which shuts off

 

 

heat if the water level drops. Check for proper water level. If the water

 

 

level is too low, the overflow tube might be out of position.

 

2.

Circuit breaker to machine tripped.

 

3.

Steam valve not open completely.

 

4.

Gas line closed.

 

 

If a failure occurs due to the gas heat control board or gas pressure, the

 

 

reset button, located on the side of the gas burner control box, will pop

 

 

out. This completely shuts off the gas heat system. To reset the system,

 

 

push the button in. If the system does not reset, contact Service.

 

 

 

No or slow fill.

1.

Dirty line strainer causing reduced water flow. Turn off water supply,

 

 

remove strainer cap, withdraw and clean screen. Reassemble.

– 19 –

Image 19
Contents Model AM14 & AM14C Dishwashers For Your Safety Table of Contents Model AM14 Line Strainer -with Booster Heater Model AM14 & AM14C Dishwashers GeneralLocation InstallationInstallation Codes UnpackingWater Connection Sanitizing Mode Wash RinseWater Requirements Plumbing Connections Drain ConnectionWith Electric Booster Water Heater Venting Requirements with GAS Tank Heat Rate of Exhaust Flow Calculations Electrical Connections Dishwasher Connection Check Rotation Three-Phase Machines OnlyOptional Equipment Control Connections Amps Electrical DataPreparation OperationDishwashing Cleaning DOs and DONTs for Your NEW Hobart Warewasher Motors MaintenanceTroubleshooting Wash ArmsDisconnect Electrical Power Supply Both Dishwasher Symptom Possible CauseSymptom Possible Cause Service

AM14 ML-32614, AM14C ML-32615 specifications

The Hobart AM14C ML-32615 and AM14 ML-32614 are powerful commercial mixers designed to meet the demands of large-scale food preparation in various settings, including restaurants, catering services, and bakeries. Known for their robust construction and advanced features, these mixers promise efficiency, reliability, and versatility in food handling.

One of the standout features of both models is their heavy-duty design, which includes a durable, stainless-steel bowl that accommodates significant quantities of ingredients. The AM14C ML-32615 has a higher capacity than the AM14 ML-32614, making it ideal for larger batches, while the latter is well-suited for smaller operations or less intensive mixing needs. Both models boast a planetary mixing action, ensuring thorough incorporation of ingredients at all times, which is essential for achieving consistent results in baking and cooking.

The Hobart AM14 series is equipped with multiple speeds, allowing for precise control over the mixing process. Users can select different speed settings depending on the type of mixture they are creating, whether it be a light batter or a dense dough. This flexibility is invaluable in commercial kitchens, where varying recipes call for specific mixing techniques.

In terms of safety, both the AM14C and AM14 models come with bowl guards that protect users from accidental contact with moving parts. These mixers also feature a powerful motor that can handle tough ingredients with ease, making them resilient in high-demand environments. Additionally, the intuitive controls streamline operation, making it easy for kitchen staff to switch between different speeds and settings as needed.

Notably, the construction of the AM14C and AM14 mixers emphasizes easy maintenance. Their design allows for straightforward disassembly, which is crucial for routine cleaning and upkeep in busy kitchens. The mixers’ components are built to withstand the rigors of commercial use, ensuring longevity and dependable performance.

In summary, the Hobart AM14C ML-32615 and AM14 ML-32614 mixers embody the blend of strength, technology, and usability required in modern culinary operations. With their advanced features, high-capacity mixing bowls, variable speeds, and safety measures, these mixers are essential tools for any professional kitchen looking to elevate its food preparation capabilities. Whether tackling large batches of dough or whipping up delicate batters, these mixers stand poised to deliver superb results in various culinary applications.