Frymaster YSCF14G operation manual Periodic/Annual, Built-in Filtration

Page 24

YSCF14G SERIES GAS FRYERS

CHAPTER 5: PREVENTATIVE MAINTENANCE

5.4 Periodic/Annual

This appliance should be inspected and adjusted periodically by qualified service personnel as part of a regular kitchen maintenance program.

Frymaster recommends that this appliance be inspected at least annually by a Factory Authorized Service Technician as follows:

•Inspect the cabinet inside and out, front and rear for excessive oil build-up and/or oil migration.

•Verify that the flue opening is not obstructed by debris or accumulations of solidified oil or shortening.

•Verify that burners and associated components (i.e. gas valves, pilot assemblies, ignitors, etc.) are in good condition and functioning properly. Inspect all gas connections for leaks and verify that all connections are properly tightened.

•Verify that the burner manifold pressure is in accordance with that specified on the appliance’s rating plate.

•Verify that the temperature and high-limit probes are properly connected, tightened and functioning properly, and that mounting hardware and probe guard are present and properly installed.

•Verify that component box components (i.e. computer/controller, transformers, relays, interface boards, etc.) are in good condition and free from oil migration build-up and other debris. Inspect the component box wiring and verify that connections are tight and that wiring is in good condition.

•Verify that all safety features (i.e. drain safety switches, reset switches, etc.) are present and functioning properly.

•Verify that the frypot/cookpot is in good condition and free of leaks and that the frypot/cookpot insulation is in serviceable condition. Verify that the frypot tube diffusers are present and in good condition (i.e. no visible deterioration or damage).

•Verify that wiring harnesses and connections are tight and in good condition.

Built-in Filtration:

•Inspect all oil-return and drain lines for leaks and verify that all connections are tight.

•Inspect the filter pan for leaks and cleanliness. Empty crumbs in the crumb basket into a fireproof container. Clean basket daily. Advice owner/operator not to allow crumbs to accumulate in basket. Insist they clean the basket daily.

•Verify that all O-rings and seals (including those on quick-disconnect fittings) are present and in good condition. Replace O-rings and seals if worn or damaged.

5-2

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Hour Service Hotline 1-800-551-8633 *8196132 YSCF14G Series with Built-In FiltrationCanada Page Table of Contents YSCF14GYSCF14G Series GAS Fryers Installation Gas ConnectionsYSCF14G Series GAS Fryers Installation Gas Connections Electrical Connections YSCF14G Series GAS Fryers Fryer Operations Initial Start-upFinal Preparation YSCF14G Series GAS Fryers BUILT-IN Filtration General Filtration PreparationAssembling the Filter Filter pan is shown partially inserted under the fryer Installing Filter Daily Filtration OperationOperating the Filter Filtering ToolsOperating the Filter Prior to filtering, skim any large debris from oil in frypot YSCF14G Series GAS Fryers BUILT-IN Filtration Filter Operation Replace the frypot grid, using care not to splash hot oil Do not Allow Crumbs to Accumulate in Tray YSCF14G Series GAS Fryers Computer Operation Basic OperationYSCF14G Series GAS Fryers Preventative Maintenance DailyWeekly Periodic/Annual Built-in FiltrationStainless Steel Care Service Hotline

YSCF14G specifications

The Frymaster YSCF14G is a high-performance commercial fryer designed to meet the demanding needs of restaurants and food service establishments. Renowned for its efficiency and versatility, the YSCF14G stands out in the competitive market of deep frying equipment.

One of the main features of the Frymaster YSCF14G is its impressive 50 lb. capacity, which allows for large batches of food to be cooked simultaneously. This is particularly beneficial for busy kitchens that require quick service without compromising on quality. The fryer is equipped with a powerful gas heating system that ensures rapid temperature recovery, leading to consistent frying results every time.

The YSCF14G incorporates advanced frying technology, including a digital control system. This feature allows operators to easily set and monitor frying times and temperatures, enhancing cooking precision and improving food quality. The digital controls also enable programmable cooking cycles, providing flexibility for various menu items while ensuring reproducibility.

Another significant characteristic of the Frymaster YSCF14G is its oil filtration system. The built-in filtration process extends the life of the frying oil by removing food particles and impurities. This not only improves the taste and appearance of fried foods but also reduces oil replacement costs, making it an economical choice for high-volume operations.

Safety and ease of use have also been prioritized in the design of the YSCF14G. It features a cool-to-the-touch handle and a hinged lid, allowing for safe access to the fry pot during operation and maintenance. The fryer is engineered with an automatic shut-off feature, which activates in the event of overheating, providing an added layer of safety for kitchen staff.

Moreover, the YSCF14G is constructed from durable stainless steel, ensuring longevity and ease of cleaning. Its sleek design complements any kitchen layout while the compact footprint makes it suitable for establishments with limited space.

In summary, the Frymaster YSCF14G is an innovative commercial fryer that combines capacity, control, and safety. With its advanced technologies and thoughtful design, it serves as an essential piece of equipment for any fast-paced food service kitchen, delivering exceptional frying performance and reliability for years to come.
Top Page Image Contents