Frymaster MRE14 SERIES warranty General Installation Requirements

Page 11

BIRE14/MRE14 SERIES E4 ELECTRIC FRYER

CHAPTER 2: INSTALLATION INSTRUCTIONS

2.1General Installation Requirements

Proper installation is essential for the safe, efficient, trouble-free operation of this appliance.

Qualified, licensed, and/or authorized installation or service personnel, as defined in Section 1.6 of this manual, should perform all installation and service on Frymaster equipment.

Failure to use qualified, licensed, and/or authorized installation or service personnel (as defined in Section 1.6 of this manual) to install or otherwise service this equipment will void the Frymaster warranty and may result in damage to the equipment or injury to personnel.

Where conflicts exist between instructions and information in this manual and local or national codes or regulations, installation and operation shall comply with the codes or regulations in force in the country in which the equipment is installed.

Service may be obtained by contacting your local Factory Authorized Service Center.

NOTICE

All fryers shipped without factory supplied cords and plug assemblies must be hardwired using flexible conduit to the terminal block located on the rear of the fryer. These fryers should be wired to NEC specifications. Hardwired units must include installation of restraint devices.

DANGER

Adequate means must be provided to limit the movement of this appliance without depending on or transmitting stress to the electrical conduit. A restraint kit is provided with the fryer. If the restraint kit is missing contact your local Frymaster Factory Authorized Service Center (FASC) for part number 826-0900.

NOTICE

If this equipment is wired directly into the electrical power supply, a means for disconnection from the supply having a contact separation of at least 3-mm in all poles must be incorporated in the fixed wiring.

NOTICE

This equipment must be positioned so that the plug is accessible unless other means for disconnection from the power supply (e.g., a circuit breaker) is provided.

NOTICE

If this appliance is permanently connected to fixed wiring, it must be connected by means of copper wires having a temperature rating of not less than 167°F (75°C).

2-1

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 8196151 Canada Page Warranty Statement Parts Return This page Intentionally Left Blank General Safety InformationDefinitions Computer Information for the M2000 ComputersEuropean Community CE Specific Information What to do if your equipment arrives damaged Shipping Damage Claim ProcedureService Information General Installation Requirements Page Power Requirements Page BIRE14/MRE14 Series E4 Electric Fryer Operating Instructions Operation Equipment Setup and Shutdown ProceduresIntroduction Do not USE Filter Powder with the PAD Turn the filter handle to the on position Page Clean Behind Fryers Weekly Fryer Clean Detachable Parts and Accessories WeeklyAnnual/Periodic System Inspection Built-In Filtration System Introduction Troubleshooting Computer and Heating Problems Problem Probable Causes Corrective ActionCorrective Action D. If the circuitry in the fryer ProblemCelsius Error Messages and Display ProblemsFailure Shows HI 2 BADFailure with Start Filtration ProblemsProblem This page Intentionally Left Blank Service Hotline

MRE14 SERIES specifications

The Frymaster MRE14 Series is a sophisticated line of commercial fryers designed to meet the demands of high-volume food service operations. Renowned for their efficiency, reliability, and innovative features, these fryers are ideal for restaurants, cafeterias, and quick-service establishments aiming to deliver quality fried foods.

One of the standout characteristics of the MRE14 Series is its energy-efficient design. Engineered to reduce energy consumption, these fryers utilize a highly efficient heating system that minimizes excess energy use while ensuring a rapid recovery time. This functionality not only cuts down operational costs but also contributes to a more sustainable kitchen environment.

The MRE14 Series features an innovative filtration system, which is vital for maintaining oil quality and extending frying life. This advanced filtration technology efficiently removes food particles and debris, leading to cleaner oil and improved flavor profiles in fried products. Regular filtration cycles can be conveniently automated, providing operators ease and flexibility amidst busy service times.

Another significant aspect of the Frymaster MRE14 Series is its precise temperature control technology. This feature ensures consistent frying results by allowing users to set and maintain the desired oil temperature with remarkable accuracy. The integrated computer controls also offer customizable frying time settings tailored to specific menu items, ensuring optimal cooking results every time.

The design of the MRE14 fryers is user-friendly, emphasizing both accessibility and ease of operation. The front-access oil drain simplifies the process of disposing of used frying oil, saving time and reducing manual labor. Additionally, the fryer's durable construction means it can withstand the rigors of daily commercial use while maintaining peak performance.

Safety is another key consideration in the design of the MRE14 Series. Equipped with multiple safety features, including high-temperature limit switches and automatic shut-off capabilities, these fryers are engineered to prevent accidents and ensure a secure working environment.

In summary, the Frymaster MRE14 Series stands out in the competitive market of commercial fryers. With its energy-efficient design, advanced oil filtration, precise temperature control, user-friendly features, and robust safety measures, this series is crafted to not only enhance operational efficiency but also deliver top-quality fried foods consistently. For establishments looking to elevate their frying capabilities, the MRE14 Series represents an excellent investment in culinary excellence.
Top Page Image Contents