Frymaster MRE14 SERIES warranty Filtration Problems, Start

Page 29

6.2.3 Filtration Problems

Problem

Probable Causes

Corrective Action

 

 

A. Verify that the power cord is

 

A. Power cord is not plugged in or

fully plugged in. If so, verify

 

circuit breaker is tripped.

that circuit breaker is not

 

 

tripped.

 

 

B. If the motor is too hot to touch

 

 

for more than a few seconds, the

 

B. Pump motor has overheated

thermal overload switch has

 

causing the thermal overload

probably tripped. Allow the

Filter pump won't

switch to trip.

motor to cool at least 45

 

minutes then press the Pump

start.

 

 

Reset Switch.

 

 

 

C. Blockage in filter pump.

C. Pump blockages are usually

 

Test: Close the drain valve and

caused by sediment buildup in

 

the pump due to improperly

 

pull the filter pan out from the

sized or installed filter

 

fryer. Activate the pump. If the

components and failure to use

 

pump motor hums for a short time

the crumb screen. Call FASC.

 

then stops, the probable cause is

 

 

blockage of the pump itself.

 

Filter pump runs

Blockage in filter pan suction tube.

The blockage may be caused by

Test: Close the drain valve and pull

sediment buildup or, if solid

but oil does not

shortening is used, solidified

return to frypot and

the filter pan out from the fryer.

shortening in the tube. Use a thin,

there is no bubbling

Activate the pump. If bubbling

flexible wire to remove the

oil.

occurs, there is a blockage in the

blockage. If the blockage cannot

 

filter pan suction tube.

be removed, call FASC.

 

 

A. If using filter paper or pad

 

 

configuration, verify that filter

 

 

screen is in bottom of pan with

 

 

paper or pad on top of screen.

 

 

Verify if using a pad that the

 

 

rough side is facing up.

Filter pump runs,

A. Improperly installed filter pan

Verify that O-rings are present

but oil return is very

components.

and in good condition on filter

slow.

 

 

pan connection fitting.

 

 

 

 

If using Magnasol filter

 

 

assembly, verify that O-ring is

 

 

present and in good condition on

 

 

filter screen fitting.

 

Continued on

following page.

6-6

Page 28 Page 30
Image 29
Page 28 Page 30
Contents 8196151 Canada Page Warranty Statement Parts Return This page Intentionally Left Blank General Safety InformationDefinitions Computer Information for the M2000 ComputersEuropean Community CE Specific Information What to do if your equipment arrives damaged Shipping Damage Claim ProcedureService Information General Installation Requirements Page Power Requirements Page BIRE14/MRE14 Series E4 Electric Fryer Operating Instructions Operation Equipment Setup and Shutdown ProceduresIntroduction Do not USE Filter Powder with the PAD Turn the filter handle to the on position Page Clean Behind Fryers Weekly Fryer Clean Detachable Parts and Accessories WeeklyAnnual/Periodic System Inspection Built-In Filtration System Introduction Troubleshooting Computer and Heating Problems Problem Probable Causes Corrective ActionCorrective Action D. If the circuitry in the fryer ProblemCelsius Error Messages and Display ProblemsFailure Shows HI 2 BADFailure with Start Filtration ProblemsProblem This page Intentionally Left Blank Service Hotline

MRE14 SERIES specifications

The Frymaster MRE14 Series is a sophisticated line of commercial fryers designed to meet the demands of high-volume food service operations. Renowned for their efficiency, reliability, and innovative features, these fryers are ideal for restaurants, cafeterias, and quick-service establishments aiming to deliver quality fried foods.

One of the standout characteristics of the MRE14 Series is its energy-efficient design. Engineered to reduce energy consumption, these fryers utilize a highly efficient heating system that minimizes excess energy use while ensuring a rapid recovery time. This functionality not only cuts down operational costs but also contributes to a more sustainable kitchen environment.

The MRE14 Series features an innovative filtration system, which is vital for maintaining oil quality and extending frying life. This advanced filtration technology efficiently removes food particles and debris, leading to cleaner oil and improved flavor profiles in fried products. Regular filtration cycles can be conveniently automated, providing operators ease and flexibility amidst busy service times.

Another significant aspect of the Frymaster MRE14 Series is its precise temperature control technology. This feature ensures consistent frying results by allowing users to set and maintain the desired oil temperature with remarkable accuracy. The integrated computer controls also offer customizable frying time settings tailored to specific menu items, ensuring optimal cooking results every time.

The design of the MRE14 fryers is user-friendly, emphasizing both accessibility and ease of operation. The front-access oil drain simplifies the process of disposing of used frying oil, saving time and reducing manual labor. Additionally, the fryer's durable construction means it can withstand the rigors of daily commercial use while maintaining peak performance.

Safety is another key consideration in the design of the MRE14 Series. Equipped with multiple safety features, including high-temperature limit switches and automatic shut-off capabilities, these fryers are engineered to prevent accidents and ensure a secure working environment.

In summary, the Frymaster MRE14 Series stands out in the competitive market of commercial fryers. With its energy-efficient design, advanced oil filtration, precise temperature control, user-friendly features, and robust safety measures, this series is crafted to not only enhance operational efficiency but also deliver top-quality fried foods consistently. For establishments looking to elevate their frying capabilities, the MRE14 Series represents an excellent investment in culinary excellence.
Top Page Image Contents