Jenn-Air W10379136B Install Anti-Tip Boards, Connect the Water Supply, To Install Anti-tip Boards

Page 15

Install Anti-Tip Boards

IMPORTANT:

If a solid soffit is not available, an anti-tip board must be installed.

It is recommended that board(s) be installed before the refrigerator is installed.

Board(s) must be long enough to fully cover the width of the compressor cover.

Locate the board(s) so the bottom surface(s) of the board(s) is(are) 84" (213 cm) from the floor.

During installation, raise the refrigerator up until the top of the refrigerator is making contact with the bottom of the anti-tip board(s). Do not crush the compressor cover when raising the rear leveling legs.

To Install Anti-tip Boards

1.Mark the stud locations on rear wall 80" to 90" (203 cm to 229 cm) above floor.

2.Securely attach one or two 2" x 4" x 32" (5 cm x 10 cm x 81 cm) boards to wall studs behind refrigerator. Use six #8 x 3" (7.6 cm) (or longer) wood screws. The wood screws must be screwed into the studs at least 1½" (3.8 cm). The board(s) must overlap the compressor cover.

A B

C

¹⁄₄" (6 mm) max.

2" (5 cm)

84"

(213.4 cm)

D

E

A. Center board ¹⁄₄" (6.35 mm) max. above refrigerator

B. Two 2" x 4" x 32" (5 cm x 10 cm x 81 cm) boards

C. Attach to studs with six #8 x 3" (7.6 cm) screws

D. Compressor cover

E. Distance from bottom of anti-tip board to floor

Connect the Water Supply

Read all directions before you begin.

IMPORTANT: If you turn the refrigerator on before the water line is connected, turn the ice maker OFF.

Connect to Water Line

Parts Needed:

Minimum 7 ft (2.13 m) flexible, codes approved water supply line

Style 1—Shutoff Valve Connection

NOTE: If your water line connection does not look like Style 1, see “Style 2—Copper Line Connection.”

1.Unplug refrigerator or disconnect power supply.

IMPORTANT: Before attaching the tubing to shutoff valve, flush the main water supply line to remove particles and air in the water line. Allow enough flow so that water becomes clear. Flushing the water line may help avoid filters and/or water valves from becoming clogged.

2.Connect the flexible, codes approved water supply line to the water shutoff valve by threading the provided nut onto the shutoff valve as shown.

A

B

C

A.Bulb

B.Nut

C.Water tubing

3.Place the end of the tubing into a bucket, and turn shutoff valve ON.

4.Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.

15

Image 15
Contents Guiía DE Instalación Installation GuideGuide D’INSTALLATION Table of Contents/Índice/Table des matièresTable of Contents ÍndiceTable DES Matières Your safety and the safety of others are very important Refrigerator SafetyPro-StyleStainless Design ModelsCustom-Made Panel Design Euro-Style Stainless DesignInstallation Requirements AccessoriesTools and Parts Parts Provided Parts NeededLocation Requirements Opening DimensionsWidth a as shown Dimension B as Installation TypeWater Pressure Electrical RequirementsWater Supply Requirements Recommended Grounding MethodProduct Dimensions Door Swing DimensionsTipping Radius Inset Cabinet and Panel Installation OptionsCabinet Depth-25 63.5 cm Framed Cabinetry Cabinet Depth-24 60.9 cmOption 2-False Front cabinet face only Fully Integrated Grille Installation RequirementsStandard Grille Bracket Standard Integrated Grille Installation RequirementsPanel Kit Installation Requirements Standard Integrated Grille Installation-Full Product ViewDoor Panels Panel Kit Installation-Side ViewPanel Kit Installation-Full Product View Custom Wood Overlay PanelsInstallation Instructions Unpack the RefrigeratorMove the Refrigerator into House Connect to Water Line Parts Needed Install Anti-Tip BoardsTo Install Anti-tip Boards Connect the Water SupplyStyle 2-Copper Line Connection Parts SuppliedConnect to Refrigerator Install Side Trims Plug in RefrigeratorMove Refrigerator to Final Location Level and Align Refrigerator Side View Install Refrigerator and PanelsInstall Top Grille Filler standard installation only Custom Wood Panel ModelsTop Grille Panel Predrill Panels custom wood panels onlyPredrill Panels panel kits only Prepare Panels custom wood and panel kitsRemove Trim Pieces Install Door PanelsDoor Swing Adjustment Install Top Grille PanelStandard Integrated Grille Installation-Flush Grille Fully Integrated Grille Installation-Full Height GrilleTools Needed ³⁄₃₂ hex key Install HandlesDoor Panels-Floating Glass Design Freezer Refrigerator Left-Hand Door Right-Hand DoorComplete Installation Install Base GrilleSu seguridad y la seguridad de los demás es muy importante Seguridad DEL RefrigeradorDiseño en bronce lubricado ModelosDiseño del panele a la medida Números de modelos base JS42NXFXDW, JS48NXFXDWRequisitos DE Instalación AccesoriosPiezas y herramientas W10250963-48 Dos Piezas necesariasPiezas provistas W10203457Requisitos de ubicación Medidas de la aberturaW10222283-Rejilla Requisitos del suministro de agua Requisitos eléctricosModelo a Medidas del productoSuministro de agua de ósmosis inversa Vista superior Presión del aguaArco de vuelco Medidas de oscilación de las puertasOpciones para la instalación Del armario y los paneles Profundidad del armario-24 60,9 cm Profundidad del armario-25 63,5 cm Armarios con marcosRecuadro Armarios sin marcoOpción 2-Frente falso solamente la cara del armario Soporte estándar de rejilla Requisitos de instalación del juego de PanelesPaneles de la puerta Dimensiones del panel de Madera recubiertoPaneles de madera recubiertos La medida Instalación del juego de paneles-Vista lateralPanel de la rejilla Instrucciones DE InstalaciónDesempaque el refrigerador Cómo introducir el refrigerador en la casaConexión a la línea de agua Piezas necesarias Cómo instalar los tableros antivuelcoConexión del suministro de agua Cómo instalar los tableros antivuelcoEstilo 2-Conexión de la tubería de cobre Piezas suministradasConexión al refrigerador Cómo enchufar el refrigerador Instalación de las molduras lateralesCómo mover el refrigerador a Su ubicación final Nivelación y alineamiento del refrigeradorVista superior Modelos con panel de madera a la medida Instalación del refrigerador y los panelesModelos con juego de paneles Vista lateralPerno prisionero para puerta Bloque de instalación Panel para la rejilla superiorSaque las piezas de la cubierta Cómo instalar los paneles de la puertaInstalación del panel para la rejilla superior Complete la instalación Cómo ajustar la oscilación de las puertasCongelador Refrigerador Puerta izquierda Puerta derecha Instalación de las manijasInstalación de la rejilla de la base Paneles de la puerta-Diseño de vidrio flotanteCómo terminar la instalación Votre sécurité et celle des autres est très importante Sécurité DU RéfrigérateurConception bronze huilé ModèlesConception de panneau du matériel personnalisé Numéros de modèles de base JS42NXFXDW, JS48NXFXDWExigences D’INSTALLATION AccessoiresOutillage et pièces Pièces nécessaires Pièces fourniesW10202875-36 Bloc de montage Exigences d’emplacementDimensions de l’ouverture d’encastrement Gabarits de panneau W10222281-Côte à côteSpécifications électriques Alimentation en eau par osmose inverse Dimensions du produitVue de dessus Pression de l’eauDimensions pour le pivotement des portes Options d’installation du placard et du PanneauRayon de basculement Profondeur de placard-24 60,9 cm Profondeur de placard-25 63,5 cm Meubles à encadrementInséré Meubles sans encadrementOption 2-Avant décoratif façade de meuble uniquement Spécifications d’une installation grille totalement intégréeSupport de grille standard Critères d’une installation grille Intégrée standardPanneaux de porte Dimensions des panneaux de bois Décoratifs personnalisésInstallation de l’ensemble de panneau-Vue latérale Panneaux de bois décoratifs personnalisésModèle Retrait ³⁄₈ ¹⁄₈ Instructions D’INSTALLATIONDéballage du réfrigérateur Faire entrer le réfrigérateur dans le domicileRaccordement à la canalisation d’eau Pièces nécessaires Installation de planches antibasculementInstallation des planches antibasculement Raccordement à l’alimentation en eauStyle 2-Raccordement de la canalisation d’eau en cuivre Raccordement au réfrigérateurInstallation des garnitures latérales Branchement du le réfrigérateurVue du dessus Réglage de l’aplomb et alignement du Réfrigérateur Déplacement du réfrigérateur à son Emplacement définitifModèles avec panneau de bois personnalisé Installation du réfrigérateur et Des panneauxModèles avec panneaux fournis Vue latéralePanneau de la grille supérieure Gabarits de perçage Ensembles avec panneaux uniquementInstallation des panneaux de porte Installation du panneau de la grille supérieureDépose des garnitures Réglage de l’ouverture de la porte Installation grille intégrée standard-Grille affleuranteInstallation grille intégrée-Grille de pleine hauteur Achever l’installationPar la gauche Par la droite Installation des poignéesPanneaux de porte-Conception de verre flottant Congélateur Réfrigérateur Ouverture de porteInstallation de la grille de la base Achever l’installationW10379136B

W10379136B specifications

The Jenn-Air W10379136B is a state-of-the-art wall oven that epitomizes precision, customization, and luxury in home cooking. This model is designed to cater to the needs of modern chefs who demand both aesthetics and functionality in their kitchen appliances. With its sleek stainless steel finish and built-in design, the W10379136B seamlessly integrates into any kitchen décor, enhancing sophistication and elegance.

One of the standout features of the W10379136B is its advanced True Convection technology. This innovative cooking method utilizes a powerful fan and a third heating element to distribute heat evenly throughout the oven. This ensures that food cooks uniformly, reducing cooking times and enhancing the flavor and texture of dishes. Whether baking bread, roasting meats, or preparing casseroles, users can expect exceptional results every time.

Additionally, the Jenn-Air W10379136B boasts a range of innovative cooking modes, including True Hide and Steam Bake options. The True Hide feature allows users to bake or broil in perfect harmony, while the Steam Bake option introduces moisture during the baking process, creating a crusty exterior and a moist interior for artisanal breads and pastries. With these options, home chefs can experiment with various cooking techniques and achieve restaurant-quality results.

The oven’s precision temperature management is another notable technology that sets it apart. The advanced temperature sensor continuously monitors the internal environment, adjusting heat output as needed. This ensures accurate cooking temperatures, which is vital for delicate recipes and precision cooking. The W10379136B also features a user-friendly touchscreen interface, making it easy to navigate through cooking options, set timers, and monitor progress.

In terms of design, the Jenn-Air W10379136B emphasizes thoughtful engineering with its quiet operation and easy-cleaning features. The self-cleaning cycle simplifies maintenance, while the soft-close door adds a touch of elegance and convenience. Additionally, with a spacious interior, this oven provides ample space to accommodate large dishes, making it ideal for family gatherings and entertaining.

In conclusion, the Jenn-Air W10379136B is a premium wall oven that combines elegant design with cutting-edge technology. Its features like True Convection cooking, precise temperature management, and versatile cooking modes make it an essential tool for any culinary enthusiast. With this appliance, users can elevate their cooking experience and impress family and friends with expertly prepared meals.