Jenn-Air W10379136B Plug in Refrigerator, Install Side Trims, Move Refrigerator to Final Location

Page 17

Plug in Refrigerator

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Set control switch at top of cabinet to the OFF position.

2.Plug into a grounded 3 prong outlet.

Install Side Trims

The side trims cover the space between the refrigerator and the adjacent cabinets. There is a trim piece taped to each side of the refrigerator. Install each trim piece to the side of the refrigerator to which it is taped.

1.Remove the tape attaching the trim pieces to the sides of the refrigerator. Set the trim pieces aside.

IMPORTANT: For installations using custom wood panels with ¹⁄₈" gap, the bulb-shaped section of the trim piece will interfere with the panels. Score each trim piece at the base of the bulb-shaped section, then remove and discard this section. See the “Top View” graphic later in this section.

2.Remove the 4 screws from the side of the refrigerator cabinet.

A

A. Side trim screws

3.Using the original holes and the screws removed in Step 2, fasten the side trim to the refrigerator cabinet.

NOTE: Make sure to fasten each trim piece to the side of the refrigerator cabinet from which it was removed. The bulb- shaped section should be forward with the notch at the top, as shown.

Top View

A

B

C

D

A. Side trim

C. Door

B. Adjacent cabinet

D. Bulb-shaped section

Move Refrigerator to Final Location

WARNING

Tip Over Hazard

Refrigerator is top heavy and tips easily when not completely installed.

Keep doors taped closed until refrigerator is completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

IMPORTANT:

To avoid floor damage, make sure levelers are raised (not touching floor) and refrigerator is on rollers before moving.

Use the installation block, attached to the door hinge, as a reference to make sure the refrigerator is pushed back far enough into the opening, so that when the panels are installed they will be flush with the adjacent cabinets.

NOTE: A flush installation is not possible with a 24" (60.9 cm) deep opening.

17

Image 17
Contents Guide D’INSTALLATION Installation GuideTable of Contents/Índice/Table des matières Guiía DE InstalaciónTable DES Matières Table of ContentsÍndice Your safety and the safety of others are very important Refrigerator SafetyCustom-Made Panel Design ModelsEuro-Style Stainless Design Pro-StyleStainless DesignTools and Parts Installation RequirementsAccessories Parts Provided Parts NeededWidth a as shown Dimension B as Opening DimensionsInstallation Type Location RequirementsWater Supply Requirements Electrical RequirementsRecommended Grounding Method Water PressureTipping Radius Product DimensionsDoor Swing Dimensions Cabinet Depth-25 63.5 cm Framed Cabinetry Cabinet and Panel Installation OptionsCabinet Depth-24 60.9 cm InsetOption 2-False Front cabinet face only Fully Integrated Grille Installation RequirementsPanel Kit Installation Requirements Standard Integrated Grille Installation RequirementsStandard Integrated Grille Installation-Full Product View Standard Grille BracketPanel Kit Installation-Full Product View Panel Kit Installation-Side ViewCustom Wood Overlay Panels Door PanelsMove the Refrigerator into House Installation InstructionsUnpack the Refrigerator To Install Anti-tip Boards Install Anti-Tip BoardsConnect the Water Supply Connect to Water Line Parts NeededConnect to Refrigerator Style 2-Copper Line ConnectionParts Supplied Move Refrigerator to Final Location Install Side TrimsPlug in Refrigerator Level and Align Refrigerator Install Top Grille Filler standard installation only Install Refrigerator and PanelsCustom Wood Panel Models Side ViewPredrill Panels panel kits only Predrill Panels custom wood panels onlyPrepare Panels custom wood and panel kits Top Grille PanelRemove Trim Pieces Install Door PanelsStandard Integrated Grille Installation-Flush Grille Install Top Grille PanelFully Integrated Grille Installation-Full Height Grille Door Swing AdjustmentDoor Panels-Floating Glass Design Install HandlesFreezer Refrigerator Left-Hand Door Right-Hand Door Tools Needed ³⁄₃₂ hex keyComplete Installation Install Base GrilleSu seguridad y la seguridad de los demás es muy importante Seguridad DEL RefrigeradorDiseño del panele a la medida ModelosNúmeros de modelos base JS42NXFXDW, JS48NXFXDW Diseño en bronce lubricadoPiezas y herramientas Requisitos DE InstalaciónAccesorios Piezas provistas Piezas necesariasW10203457 W10250963-48 DosW10222283-Rejilla Requisitos de ubicaciónMedidas de la abertura Requisitos del suministro de agua Requisitos eléctricosSuministro de agua de ósmosis inversa Medidas del productoVista superior Presión del agua Modelo aOpciones para la instalación Del armario y los paneles Arco de vuelcoMedidas de oscilación de las puertas Recuadro Profundidad del armario-25 63,5 cm Armarios con marcosArmarios sin marco Profundidad del armario-24 60,9 cmOpción 2-Frente falso solamente la cara del armario Soporte estándar de rejilla Requisitos de instalación del juego de PanelesPaneles de madera recubiertos La medida Dimensiones del panel de Madera recubiertoInstalación del juego de paneles-Vista lateral Paneles de la puertaDesempaque el refrigerador Instrucciones DE InstalaciónCómo introducir el refrigerador en la casa Panel de la rejillaConexión del suministro de agua Cómo instalar los tableros antivuelcoCómo instalar los tableros antivuelco Conexión a la línea de agua Piezas necesariasConexión al refrigerador Estilo 2-Conexión de la tubería de cobrePiezas suministradas Cómo enchufar el refrigerador Instalación de las molduras lateralesVista superior Cómo mover el refrigerador a Su ubicación finalNivelación y alineamiento del refrigerador Modelos con panel de madera a la medida Instalación del refrigerador y los panelesModelos con juego de paneles Vista lateralPerno prisionero para puerta Bloque de instalación Panel para la rejilla superiorInstalación del panel para la rejilla superior Saque las piezas de la cubiertaCómo instalar los paneles de la puerta Complete la instalación Cómo ajustar la oscilación de las puertasInstalación de la rejilla de la base Instalación de las manijasPaneles de la puerta-Diseño de vidrio flotante Congelador Refrigerador Puerta izquierda Puerta derechaCómo terminar la instalación Votre sécurité et celle des autres est très importante Sécurité DU RéfrigérateurConception de panneau du matériel personnalisé ModèlesNuméros de modèles de base JS42NXFXDW, JS48NXFXDW Conception bronze huiléOutillage et pièces Exigences D’INSTALLATIONAccessoires W10202875-36 Pièces nécessairesPièces fournies Dimensions de l’ouverture d’encastrement Exigences d’emplacementGabarits de panneau W10222281-Côte à côte Bloc de montageSpécifications électriques Vue de dessus Dimensions du produitPression de l’eau Alimentation en eau par osmose inverseRayon de basculement Dimensions pour le pivotement des portesOptions d’installation du placard et du Panneau Inséré Profondeur de placard-25 63,5 cm Meubles à encadrementMeubles sans encadrement Profondeur de placard-24 60,9 cmOption 2-Avant décoratif façade de meuble uniquement Spécifications d’une installation grille totalement intégréeSupport de grille standard Critères d’une installation grille Intégrée standardInstallation de l’ensemble de panneau-Vue latérale Dimensions des panneaux de bois Décoratifs personnalisésPanneaux de bois décoratifs personnalisés Panneaux de porteDéballage du réfrigérateur Instructions D’INSTALLATIONFaire entrer le réfrigérateur dans le domicile Modèle Retrait ³⁄₈ ¹⁄₈Installation des planches antibasculement Installation de planches antibasculementRaccordement à l’alimentation en eau Raccordement à la canalisation d’eau Pièces nécessairesStyle 2-Raccordement de la canalisation d’eau en cuivre Raccordement au réfrigérateurVue du dessus Installation des garnitures latéralesBranchement du le réfrigérateur Réglage de l’aplomb et alignement du Réfrigérateur Déplacement du réfrigérateur à son Emplacement définitifModèles avec panneau de bois personnalisé Installation du réfrigérateur et Des panneauxModèles avec panneaux fournis Vue latéralePanneau de la grille supérieure Gabarits de perçage Ensembles avec panneaux uniquementDépose des garnitures Installation des panneaux de porteInstallation du panneau de la grille supérieure Installation grille intégrée-Grille de pleine hauteur Installation grille intégrée standard-Grille affleuranteAchever l’installation Réglage de l’ouverture de la portePanneaux de porte-Conception de verre flottant Installation des poignéesCongélateur Réfrigérateur Ouverture de porte Par la gauche Par la droiteW10379136B Installation de la grille de la baseAchever l’installation

W10379136B specifications

The Jenn-Air W10379136B is a state-of-the-art wall oven that epitomizes precision, customization, and luxury in home cooking. This model is designed to cater to the needs of modern chefs who demand both aesthetics and functionality in their kitchen appliances. With its sleek stainless steel finish and built-in design, the W10379136B seamlessly integrates into any kitchen décor, enhancing sophistication and elegance.

One of the standout features of the W10379136B is its advanced True Convection technology. This innovative cooking method utilizes a powerful fan and a third heating element to distribute heat evenly throughout the oven. This ensures that food cooks uniformly, reducing cooking times and enhancing the flavor and texture of dishes. Whether baking bread, roasting meats, or preparing casseroles, users can expect exceptional results every time.

Additionally, the Jenn-Air W10379136B boasts a range of innovative cooking modes, including True Hide and Steam Bake options. The True Hide feature allows users to bake or broil in perfect harmony, while the Steam Bake option introduces moisture during the baking process, creating a crusty exterior and a moist interior for artisanal breads and pastries. With these options, home chefs can experiment with various cooking techniques and achieve restaurant-quality results.

The oven’s precision temperature management is another notable technology that sets it apart. The advanced temperature sensor continuously monitors the internal environment, adjusting heat output as needed. This ensures accurate cooking temperatures, which is vital for delicate recipes and precision cooking. The W10379136B also features a user-friendly touchscreen interface, making it easy to navigate through cooking options, set timers, and monitor progress.

In terms of design, the Jenn-Air W10379136B emphasizes thoughtful engineering with its quiet operation and easy-cleaning features. The self-cleaning cycle simplifies maintenance, while the soft-close door adds a touch of elegance and convenience. Additionally, with a spacious interior, this oven provides ample space to accommodate large dishes, making it ideal for family gatherings and entertaining.

In conclusion, the Jenn-Air W10379136B is a premium wall oven that combines elegant design with cutting-edge technology. Its features like True Convection cooking, precise temperature management, and versatile cooking modes make it an essential tool for any culinary enthusiast. With this appliance, users can elevate their cooking experience and impress family and friends with expertly prepared meals.