Jenn-Air W10379136B manual Level and Align Refrigerator

Page 18

After the refrigerator is leveled and aligned, remove the installation block from the door hinge and use it to check the spacing between the panels and adjacent cabinets.

NOTE: The installation block is designed to provide accurate spacing for ³⁄₄" (1.9 cm), ³⁄₈" (9.53 mm) and ¹⁄₈" (3.18 mm).

After moving the refrigerator to its final location:

1.Use a ⁵⁄₁₆" socket driver to turn the leveling bolts clockwise to extend the legs to the floor as shown. The rollers should be off the floor.

³⁄₄"

¹⁄₈"

(1.9 cm)

(3.18 mm)

 

³⁄₈"

(9.53 mm)

1.Place top of cardboard carton or plywood under refrigerator. Remove dolly.

2.Move the refrigerator straight back and evenly into the opening. Be sure that the water tubing is not kinked and the power supply cord is on top of the refrigerator.

NOTE: If the power supply cord is behind the refrigerator, it will not install properly.

3.Make sure the installation block is flush with the adjacent cabinets.

NOTE: To achieve a flush installation, it is critical to verify a ³⁄₄" (1.9 cm) depth from the front face of the adjacent cabinetry to the refrigerator.

A

B

³⁄₄" (1.9 cm)

C

A. Adjacent cabinet or wall

B. Installation block

C. Face of refrigerator

Level and Align Refrigerator

WARNING

Tip Over Hazard

Refrigerator is top heavy and tips easily when not completely installed.

Keep doors taped closed until refrigerator is completely installed.

Use two or more people to move and install refrigerator.

Failure to do so can result in death or serious injury.

IMPORTANT: All four leveling legs must contact the floor to support and stabilize the full weight of refrigerator. Rollers are for moving the refrigerator, not for permanent support.

A B

A

B

A. Rear leveling bolt

B. Front leveling bolt

2.Adjust the leveling legs to level and align the refrigerator from left to right and front to back so that the refrigerator is level and aligned with the cabinets.

3.Continue adjusting all of the leveling legs to raise the refrigerator until the top is within at least ¹⁄₄" (6.35 mm) of the top soffit as shown.

NOTE: If an anti-tip board has been used, adjust the leveling legs until the top of the refrigerator is making contact with the bottom of the anti-tip board(s). Do not crush the compressor cover.

A B

C

¹⁄₄" (6 mm) max.

2" (5 cm)

84"

(213.4 cm)

D

E

A. Center board ¹⁄₄" (6.35 mm) max. above refrigerator

B. Two 2" x 4" x 32" (5 cm x 10 cm x 81 cm) boards

C. Attach to studs with six #8 x 3" (7.6 cm) screws

D. Compressor cover

E. Distance from bottom of anti-tip board to floor

IMPORTANT: Adjust in small increments to keep from damaging the cabinet trim and causing problems with the door alignment or top grille fit. To avoid damage to the cabinet or leveling legs, do not apply more than 50 inch- pounds (5.65 Nm) of torque to the leveling bolts. The leveling legs can be extended to a maximum of 1¹⁄₄" (3.18 cm) below the rollers.

4.After leveling the refrigerator, again use a straight edge or 4-ft level across the front of the refrigerator installation blocks to the cabinets to check that the refrigerator is still flush.

18

Image 18
Contents Table of Contents/Índice/Table des matières Installation GuideGuide D’INSTALLATION Guiía DE InstalaciónTable of Contents ÍndiceTable DES Matières Refrigerator Safety Your safety and the safety of others are very importantEuro-Style Stainless Design ModelsCustom-Made Panel Design Pro-StyleStainless DesignInstallation Requirements AccessoriesTools and Parts Parts Needed Parts ProvidedInstallation Type Opening DimensionsWidth a as shown Dimension B as Location RequirementsRecommended Grounding Method Electrical RequirementsWater Supply Requirements Water PressureProduct Dimensions Door Swing DimensionsTipping Radius Cabinet Depth-24 60.9 cm Cabinet and Panel Installation OptionsCabinet Depth-25 63.5 cm Framed Cabinetry InsetFully Integrated Grille Installation Requirements Option 2-False Front cabinet face onlyStandard Integrated Grille Installation-Full Product View Standard Integrated Grille Installation RequirementsPanel Kit Installation Requirements Standard Grille BracketCustom Wood Overlay Panels Panel Kit Installation-Side ViewPanel Kit Installation-Full Product View Door PanelsInstallation Instructions Unpack the RefrigeratorMove the Refrigerator into House Connect the Water Supply Install Anti-Tip BoardsTo Install Anti-tip Boards Connect to Water Line Parts NeededStyle 2-Copper Line Connection Parts SuppliedConnect to Refrigerator Install Side Trims Plug in RefrigeratorMove Refrigerator to Final Location Level and Align Refrigerator Custom Wood Panel Models Install Refrigerator and PanelsInstall Top Grille Filler standard installation only Side ViewPrepare Panels custom wood and panel kits Predrill Panels custom wood panels onlyPredrill Panels panel kits only Top Grille PanelInstall Door Panels Remove Trim PiecesFully Integrated Grille Installation-Full Height Grille Install Top Grille PanelStandard Integrated Grille Installation-Flush Grille Door Swing AdjustmentFreezer Refrigerator Left-Hand Door Right-Hand Door Install HandlesDoor Panels-Floating Glass Design Tools Needed ³⁄₃₂ hex keyInstall Base Grille Complete InstallationSeguridad DEL Refrigerador Su seguridad y la seguridad de los demás es muy importanteNúmeros de modelos base JS42NXFXDW, JS48NXFXDW ModelosDiseño del panele a la medida Diseño en bronce lubricadoRequisitos DE Instalación AccesoriosPiezas y herramientas W10203457 Piezas necesariasPiezas provistas W10250963-48 DosRequisitos de ubicación Medidas de la aberturaW10222283-Rejilla Requisitos eléctricos Requisitos del suministro de aguaVista superior Presión del agua Medidas del productoSuministro de agua de ósmosis inversa Modelo aArco de vuelco Medidas de oscilación de las puertasOpciones para la instalación Del armario y los paneles Armarios sin marco Profundidad del armario-25 63,5 cm Armarios con marcosRecuadro Profundidad del armario-24 60,9 cmOpción 2-Frente falso solamente la cara del armario Requisitos de instalación del juego de Paneles Soporte estándar de rejillaInstalación del juego de paneles-Vista lateral Dimensiones del panel de Madera recubiertoPaneles de madera recubiertos La medida Paneles de la puertaCómo introducir el refrigerador en la casa Instrucciones DE InstalaciónDesempaque el refrigerador Panel de la rejillaCómo instalar los tableros antivuelco Cómo instalar los tableros antivuelcoConexión del suministro de agua Conexión a la línea de agua Piezas necesariasEstilo 2-Conexión de la tubería de cobre Piezas suministradasConexión al refrigerador Instalación de las molduras laterales Cómo enchufar el refrigeradorCómo mover el refrigerador a Su ubicación final Nivelación y alineamiento del refrigeradorVista superior Instalación del refrigerador y los paneles Modelos con panel de madera a la medidaVista lateral Modelos con juego de panelesPanel para la rejilla superior Perno prisionero para puerta Bloque de instalaciónSaque las piezas de la cubierta Cómo instalar los paneles de la puertaInstalación del panel para la rejilla superior Cómo ajustar la oscilación de las puertas Complete la instalaciónPaneles de la puerta-Diseño de vidrio flotante Instalación de las manijasInstalación de la rejilla de la base Congelador Refrigerador Puerta izquierda Puerta derechaCómo terminar la instalación Sécurité DU Réfrigérateur Votre sécurité et celle des autres est très importanteNuméros de modèles de base JS42NXFXDW, JS48NXFXDW ModèlesConception de panneau du matériel personnalisé Conception bronze huiléExigences D’INSTALLATION AccessoiresOutillage et pièces Pièces nécessaires Pièces fourniesW10202875-36 Gabarits de panneau W10222281-Côte à côte Exigences d’emplacementDimensions de l’ouverture d’encastrement Bloc de montageSpécifications électriques Pression de l’eau Dimensions du produitVue de dessus Alimentation en eau par osmose inverseDimensions pour le pivotement des portes Options d’installation du placard et du PanneauRayon de basculement Meubles sans encadrement Profondeur de placard-25 63,5 cm Meubles à encadrementInséré Profondeur de placard-24 60,9 cmSpécifications d’une installation grille totalement intégrée Option 2-Avant décoratif façade de meuble uniquementCritères d’une installation grille Intégrée standard Support de grille standardPanneaux de bois décoratifs personnalisés Dimensions des panneaux de bois Décoratifs personnalisésInstallation de l’ensemble de panneau-Vue latérale Panneaux de porteFaire entrer le réfrigérateur dans le domicile Instructions D’INSTALLATIONDéballage du réfrigérateur Modèle Retrait ³⁄₈ ¹⁄₈Raccordement à l’alimentation en eau Installation de planches antibasculementInstallation des planches antibasculement Raccordement à la canalisation d’eau Pièces nécessairesRaccordement au réfrigérateur Style 2-Raccordement de la canalisation d’eau en cuivreInstallation des garnitures latérales Branchement du le réfrigérateurVue du dessus Déplacement du réfrigérateur à son Emplacement définitif Réglage de l’aplomb et alignement du RéfrigérateurInstallation du réfrigérateur et Des panneaux Modèles avec panneau de bois personnaliséVue latérale Modèles avec panneaux fournisGabarits de perçage Ensembles avec panneaux uniquement Panneau de la grille supérieureInstallation des panneaux de porte Installation du panneau de la grille supérieureDépose des garnitures Achever l’installation Installation grille intégrée standard-Grille affleuranteInstallation grille intégrée-Grille de pleine hauteur Réglage de l’ouverture de la porteCongélateur Réfrigérateur Ouverture de porte Installation des poignéesPanneaux de porte-Conception de verre flottant Par la gauche Par la droiteInstallation de la grille de la base Achever l’installationW10379136B

W10379136B specifications

The Jenn-Air W10379136B is a state-of-the-art wall oven that epitomizes precision, customization, and luxury in home cooking. This model is designed to cater to the needs of modern chefs who demand both aesthetics and functionality in their kitchen appliances. With its sleek stainless steel finish and built-in design, the W10379136B seamlessly integrates into any kitchen décor, enhancing sophistication and elegance.

One of the standout features of the W10379136B is its advanced True Convection technology. This innovative cooking method utilizes a powerful fan and a third heating element to distribute heat evenly throughout the oven. This ensures that food cooks uniformly, reducing cooking times and enhancing the flavor and texture of dishes. Whether baking bread, roasting meats, or preparing casseroles, users can expect exceptional results every time.

Additionally, the Jenn-Air W10379136B boasts a range of innovative cooking modes, including True Hide and Steam Bake options. The True Hide feature allows users to bake or broil in perfect harmony, while the Steam Bake option introduces moisture during the baking process, creating a crusty exterior and a moist interior for artisanal breads and pastries. With these options, home chefs can experiment with various cooking techniques and achieve restaurant-quality results.

The oven’s precision temperature management is another notable technology that sets it apart. The advanced temperature sensor continuously monitors the internal environment, adjusting heat output as needed. This ensures accurate cooking temperatures, which is vital for delicate recipes and precision cooking. The W10379136B also features a user-friendly touchscreen interface, making it easy to navigate through cooking options, set timers, and monitor progress.

In terms of design, the Jenn-Air W10379136B emphasizes thoughtful engineering with its quiet operation and easy-cleaning features. The self-cleaning cycle simplifies maintenance, while the soft-close door adds a touch of elegance and convenience. Additionally, with a spacious interior, this oven provides ample space to accommodate large dishes, making it ideal for family gatherings and entertaining.

In conclusion, the Jenn-Air W10379136B is a premium wall oven that combines elegant design with cutting-edge technology. Its features like True Convection cooking, precise temperature management, and versatile cooking modes make it an essential tool for any culinary enthusiast. With this appliance, users can elevate their cooking experience and impress family and friends with expertly prepared meals.