Predrill Panels custom wood panels only

Predrill Panels (custom wood panels only)

IMPORTANT: The custom panel template shipped with the refrigerator can be used for either a ³⁄₈" (0.95 cm) or a ¹⁄₈" (0.32 cm) reveal installation.

■The drilling templates are used only for custom wood overlay panels.

■The drilling templates are double-sided.

■The drilling holes are precut into the template.

1.On the template, locate the diagram of your refrigerator. Then, follow the letters and colored arrows to correctly place the drilling template on the back side panels.

NOTE: Check the direction of the arrows to determine which holes to mark when the template is aligned at the top of the panel and which holes to mark when the template is aligned at the bottom of the panel.

2.Predrill ¹⁄₈" (0.32 cm) deep pilot holes into the wood rails bordering the doors and top grille panels.

Predrill Panels (panel kits only)

IMPORTANT: The panels included in the panel kits are marked for the location of the mounting brackets only.

1.Predrill holes where marked. See “Complete Installation” later in this section, for instructions on drilling additional holes in the door panels.

2.Peel back the film cover on the door panel in the area of the brackets and handle studs. Do not fully remove the film covering until the installation is complete.

Prepare Panels (custom wood and panel kits)

IMPORTANT: The process for installing panels on the refrigerator is the same for both custom panels and panel kits.

Door Panels

1.Place panels on a firm, covered, flat surface with the front facing down.

2.Locate the 2 predrilled holes in the handle side edge of the door panel.

3.Using the installation block as a guide for depth, screw the door studs (provided with refrigerator) into the predrilled door panel (2 door studs per door).

4.For the mounting bracket, insert the hex-head pointed screws (provided with refrigerator) into the wood at the top of the door panels where they were predrilled.

NOTES:

■It is critical to use the ⁵⁄₈" screw, the longest length provided, to attach the bracket to the top of the door panel. These hex-head pointed screws are used only to attach this mounting bracket.

■Panel Kits—Insert the hex-head pointed screws into the slots in the door panel, not the U-shaped holes.

A.U-shapped hole

B.Slot

5.Attach a mounting bracket to the top edge of each door panel by placing the large end of the keyhole slot over the screws and sliding the bracket so that the screws are centered in the slots.

NOTE: Start with the screws in the center of the slots as shown, then move the door panel, as necessary, to align.

A B

A. Door panel

B. Mounting bracket

Top Grille Panel

1.Using the slotted hex-head screws (provided with refrigerator), attach a mounting bracket to each side of the top grille panel.

IMPORTANT: See the “Parts Provided” section to select the brackets designated for your installation.

■Use the Integrated Grille brackets for a Fully Integrated Grille installation with a full height grille.

A. Door stud

B. Installation block

W10379136B specifications

The Jenn-Air W10379136B is a state-of-the-art wall oven that epitomizes precision, customization, and luxury in home cooking. This model is designed to cater to the needs of modern chefs who demand both aesthetics and functionality in their kitchen appliances. With its sleek stainless steel finish and built-in design, the W10379136B seamlessly integrates into any kitchen décor, enhancing sophistication and elegance.

One of the standout features of the W10379136B is its advanced True Convection technology. This innovative cooking method utilizes a powerful fan and a third heating element to distribute heat evenly throughout the oven. This ensures that food cooks uniformly, reducing cooking times and enhancing the flavor and texture of dishes. Whether baking bread, roasting meats, or preparing casseroles, users can expect exceptional results every time.

Additionally, the Jenn-Air W10379136B boasts a range of innovative cooking modes, including True Hide and Steam Bake options. The True Hide feature allows users to bake or broil in perfect harmony, while the Steam Bake option introduces moisture during the baking process, creating a crusty exterior and a moist interior for artisanal breads and pastries. With these options, home chefs can experiment with various cooking techniques and achieve restaurant-quality results.

The oven’s precision temperature management is another notable technology that sets it apart. The advanced temperature sensor continuously monitors the internal environment, adjusting heat output as needed. This ensures accurate cooking temperatures, which is vital for delicate recipes and precision cooking. The W10379136B also features a user-friendly touchscreen interface, making it easy to navigate through cooking options, set timers, and monitor progress.

In terms of design, the Jenn-Air W10379136B emphasizes thoughtful engineering with its quiet operation and easy-cleaning features. The self-cleaning cycle simplifies maintenance, while the soft-close door adds a touch of elegance and convenience. Additionally, with a spacious interior, this oven provides ample space to accommodate large dishes, making it ideal for family gatherings and entertaining.

In conclusion, the Jenn-Air W10379136B is a premium wall oven that combines elegant design with cutting-edge technology. Its features like True Convection cooking, precise temperature management, and versatile cooking modes make it an essential tool for any culinary enthusiast. With this appliance, users can elevate their cooking experience and impress family and friends with expertly prepared meals.