GNSTALLATION INSTRUCTIONSp, Water Supply

gNSTALLATION

INSTRUCTIONSp CONT.

How TO CONNECT

THE WATER SUPPLY

HATERIALS NEEDED

>¼" outer diameter flexible copper tubing

>Shut-off valve (requires a ¼" hole to be drilled into water supply before valve attachment)

>Adjustable wrench

>- ¼" hex nut driver

4.Place end of copper tubing into water valve inlet port.Shape tubing slightly - DO NOT KINK - so that tubing feeds straight into inlet port.

I.Create service loop with tubing using care to avoid kinks in tubing.

2.Removeplasticcap from water valve inlet port.

3.Placebrass nut (A) and sleeve(B) on copper tube endas illustrated.

5.Slidebrassnut over sleeveand screw

nut into inlet port-Tighten nut with wrench.

IHPORTANT: DO NOT overtighten. Cross threading mayoccur.

6.Pullon tubing to confirmconnection is secure, Connect tubing to frame with water tubing clamp(C) and turn on water supply.Check for leaksand correct, if present.

7.Monitor water connection for 24 hours,Correct leaks,if necessary.