Jenn-Air JGW8130, JGW9130 warranty Maintenance, Oven Door, Oven Window, Oven Light

]9 Maintenance

• • • • • •	• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Oven Door	Oven Window

To protect the oven door window:

1. Do not use abrasive cleaning agents such as steel wool scouring pads or powdered cleansers as they may scratch the glass.

2. Do not hit the glass with pots, pans, furniture, toys, or other objects.

3. Do not close the oven door until the oven racks are in

place.

To remove:

1.When cool, open the oven door to the first stop position (opened about four inches).

2.Grasp door at each side. Do not use the door handle to lift door.

3.Lift up evenly until door clears hinge arms.

1.Grasp door at each side.

2.Align slots in the door with the hinge arms on the oven.

3.Slide the door down onto the

hinge arms untilthe door is com- To replace:

pletely seated on the hinges.

Push down on the top corners of the door to completely seat door on hinges. Door should not appear crooked,

NOTE: The oven door on a new wall oven may feel "spongy" when it is closed. This is normal and will

decrease with use.

Scratching, hitting, jarring or stressing the glass may weaken its structure causing an increased risk of breakage at a later date.

Oven Light

To replace oven light bulb:
1.	When oven is cool,		hold bulb cover in place, then slide
	wire retainer	off	cover.		BULB COVER
	NOTE:Bulbcoverwillfall
	if not held in place		while J/_/"_		"	"_
	removing wire retainer.			/_/" _,o	,_--_	]
2.	Remove bulb	cover and I			RErAW,AER,NEv
	light bulb.

3.Replace with a 40 watt appliance bulb.

4.Replace bulb cover and secure with wire retainer.

5. Reconnect power to wall oven. Reset clock.