Jenn-Air JGW8130 Setting the Timer, Cook Time/Stop Time, Setting the Clock, Drying select models

Controls at a Glance

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Drying (select models)

Use to dry or dehydrate foods such as fruits, vegetables and herbs,

1.Press Drying pad.

2.Press Preset (0) pad for 140°F or the appropriate number pads for the drying temperature desired,

See page 13-14 for additional information.

Setting the Timer

Use to set and then signal the completion of atime period up to 99 hours and 59 minutes (99:59).

The timer can be used independently of any other oven

activity and can be set while another oven function is operat- ing. The timer does not control the oven.

1.Press Timer pad.

• The indicator word TIMER will flash and "0HR:00" appears in the display.

Cook Time/Stop Time

Use to program the oven to start and stop automatically,

1.Press Bake or Conveet Bake pad. Press the appropriate number pads for desired temperature.

2.Press Cook Time pad. Press the appropriate number pads to enter cooking time in hours and minutes.

3.To delay the start of cooking, press Stop Time pad. Press

the appropriate number pads to enter the time you want the

oven to stop.

See page 12-13 for additional information.

Setting the Clock

1.Press Clock pad.

t The indicator word TIME will flash in the display.

2.Press the appropriate number pads until the correct time of day appears in the display.

When electrical power is supplied or after a power interrup-

tion, the last clock time, before power was interrupted, will flash.

To recall the time of day when another time function is showing, press the Clock pad.

Clock time cannot be changed when the oven has been programmed for clock controlled cooking, self-clean or

delayed self-clean.

2.Press the appropriate number padsuntil the desired num- ber of minutes or hours and minutes appear in the display.

Example: To set the Timer for 5 minutes, press the Timer pad and the number 5 pad. The control will begin count-

down after a four second delay.

Example: To set the Timer for 1 hour and 30 minutes, press the Timer pad and the numbers 1,3,0 pads. The control will begin countdown after a four second delay.

3.The last minute of the countdown will be displayed as seconds.

4.At the end of the time set, the timer will beep and "End" will appear in the display. To change the number of timer reminder signals, see page 6.

To cancel:

1.Press and hold Timer pad for several seconds. The time of day will reappear.

OR

2.Press the Timer pad and the "0" number pad. After a slight delay the time of day will reappear.

NOTE: Pressing Stop pad to cancel the timer will cancel ALL selected oven functions except the timer.