Jenn-Air W10394575A installation instructions Electronic Ignition System

Page 11

Electronic Ignition System

Install Burner Bases and Burner Caps

Install the burner base, making sure the igniter electrode is properly aligned with the base. Place burner caps on top of burner bases. If burner caps are not properly positioned, surface burners will not light.

20,000 Btu/h Ultra Power™ Dual-Flame

Burner

A

A. Incorrect

B. Correct

B

15,000 Btu/h Professional Burner

A

A. Incorrect

B. Correct

B

5,000 Btu/h Simmer/Melt Burner

A

A. Incorrect

B. Correct

B

Flame Height

The cooktop flame should be a steady blue flame approximately ¼" (0.64 cm) high.

Dual Flame Burner

A

B

A. Upper (simmer) flame

B. Lower flame

Single Flame Burner

To Adjust Flame Height:

1.Unplug range or disconnect power.

2.Remove burner grates.

3.Remove the control knobs.

4.Open the oven door and remove the 2 screws on each side of the range that hold the control console in place.

Initial Lighting and Gas Flame Adjustments

Cooktop burners use electronic igniters in place of standing pilots. When the cooktop control knob is turned to any position, the system creates a spark to light the burner. This sparking continues until the flame is lit or the knob is turned to Off.

Check Operation of Cooktop Burners

Push in and turn each control knob to the “LITE” position.

The surface burners and grill flames should light within

4 seconds. The first time a burner is lit, it may take longer than 4 seconds to light because of air in the gas line.

After verifying the proper burner operation, turn the control knobs to OFF.

If burners do not light properly:

Turn cooktop control knob to the “OFF” position.

Check that the range is plugged in and the circuit breaker has not tripped or the fuse has not blown.

Check that the gas shutoff valves are set to the “open” position.

Check that burner caps are properly positioned on burner bases.

Repeat start-up. If a burner does not light at this point, contact your dealer or authorized service company for assistance.

NOTE: Make sure to leave oven door open or the control console will not rest in the side brackets properly once it is detached.

5.Pull up on the control console and let it drop forward into the notched console brackets on each side.

A

A. Control console bracket

6.Remove the round gasket from the valve stem.

7.Put a control knob onto the valve stem of the burner you want to adjust.

11

Image 11
Contents Installation Instructions Your safety and the safety of others are very important Range SafetyTools and Parts Installation RequirementsLocation Requirements Mobile Home Additional Installation RequirementsProduct Dimensions 30 76.2 cm models Mobile home installations require48 121.9 cm models Cabinet DimensionsNatural Gas Electrical RequirementsGas Supply Requirements Type of GasBurner Input Rating Altitude Gas Supply Pressure TestingGas Supply Line Gas Pressure RegulatorMeasurement B Installation InstructionsInstall Anti-Tip Bracket Unpack RangeWall Mounting Make Gas ConnectionFloor Mounting Complete Connection Install GriddleVerify Anti-Tip Bracket Location Level RangeElectronic Ignition System Check Operation of Oven Bake Burners Reinstall Kick PlateComplete Installation If you need Assistance or ServiceTo Convert Gas Pressure Regulator GAS ConversionsLP Gas Conversion Gas Supply Pressure Testing Pull electrode out of bracket ABB Replace Oven Bake Burner CoverAB C Pull electrode out of bracket Burner orifice spud To Convert Surface BurnersComplete Installation Natural Gas Conversion Line pressure testing above ½ psi gauge 14 WCP Pull electrode out of bracket Replace Oven Bake Burner Cover AB C Pull electrode out of bracket 000 BTU 01 mm Small burners 15,000 BTU 75 mm Atlas Wiring DiagramsUser Interface UI HMI Keyboard 48 121.9 cm Oven Schematic for JGRP548 ModelStrip Circuits Burner Cooktop SchematicSW1 Votre sécurité et celle des autres est très importante Sécurité DE LA CuisinièreOutils et pièces Exigences DinstallationDimensions du produit Modèles de 30 76,2 cm Exigences d’emplacementRevêtement de hotte au-dessus de la cuisinière, suivre les Modèles de 36 91,4 cm Dimensions du placardType de gaz Spécifications électriquesSpécifications de lalimentation en gaz Test de pressurisation de la canalisation de gaz Canalisation de gazDétendeur Débit thermique des brûleurs AltitudeMesure B Instructions D’INSTALLATIONInstallation de la bride antibasculement Déballage de la cuisinièreMontage au mur Raccordement au gazMontage au plancher Achever le raccordement Vérification de lemplacement de la bride AntibasculementInstallation de la plaque à frire Réglage de laplomb de la cuisinièreSystème dallumage électronique Réinstaller les vis au sommet du garde-pieds Réinstallation du garde-piedsConversion pour lalimentation au propane Achever l’installationConversions Pour Changement DE GAZ Test de pressurisation de la canalisation de gaz Conversion du détendeurCouvercle du brûleur de cuisson au four Dégager lélectrode du support Réinstaller le couvercle du brûleur de cuisson au four AB C Dégager lélectrode du support Gicleur de brûleur Conversion des brûleurs de surfaceAchever l’installation Conversion pour lalimentation au gaz naturel Déflecteur du four Écrous du déflecteur du four Lame plate puis retirer lélectrode Réinstaller le couvercle du brûleur de cuisson au four AB C Dégager lélectrode du support Réinstaller le couvercle du brûleur de cuisson au four 15 000 BTU 75 mm Remarques Schémas de câblageInterface Utilisateur IU Schéma du four de 48 121,9 cm pour modèle JGRP548Schéma de la table de cuisson à 4 brûleurs Schémas des circuitsSchéma de la table de cuisson à 6 brûleurs SW2W10394575A

W10394575A specifications

The Jenn-Air W10394575A is a premium kitchen appliance that embodies the fusion of design, functionality, and cutting-edge technology, elevating the cooking experience for culinary enthusiasts and home chefs alike. This product is designed to offer superior performance while enhancing the aesthetic appeal of modern kitchen spaces.

One of the standout features of the Jenn-Air W10394575A is its high-efficiency performance, which is driven by innovative technology that ensures consistent heating and cooking results. The appliance is equipped with powerful heating elements that provide quick responsiveness, reducing overall cooking time. With its precise temperature control, users can expect impeccable results in every dish, from delicate pastries to hearty casseroles.

A key characteristic of the Jenn-Air W10394575A is its elegant design, tailored to fit seamlessly into contemporary kitchen interiors. The sleek lines and high-quality materials used in its construction not only create a visually stunning appliance but also ensure durability and long-term reliability. The surface is designed for easy cleaning, allowing users to maintain its pristine appearance with minimal effort.

In addition to its aesthetic appeal, the Jenn-Air W10394575A also incorporates user-friendly features that enhance the cooking experience. Its intuitive interface includes a digital display and straightforward controls, making it easy for users to select their desired settings. The appliance offers multiple cooking modes, catering to various culinary techniques such as baking, broiling, and warming, which provides versatility for different cooking styles.

Safety is another priority in the design of the Jenn-Air W10394575A. The appliance comes equipped with advanced safety features, including automatic shut-off and cool-touch surfaces, ensuring a secure cooking environment. This attention to safety allows users—regardless of expertise—to cook with confidence.

Overall, the Jenn-Air W10394575A is a remarkable addition to any kitchen, combining stylish design, advanced technology, and practical features. It is ideal for anyone who appreciates quality and performance, transforming everyday cooking into a refined culinary experience. Whether you're preparing a casual family meal or hosting a dinner party, this appliance is designed to meet and exceed the needs of modern homeowners.