Jenn-Air W10394575A Location Requirements, Mobile Home Additional Installation Requirements

Page 4

Location Requirements

IMPORTANT: Observe all governing codes and ordinances. Do not obstruct flow of combustion and ventilation air.

■It is the installer’s responsibility to comply with installation clearances specified on the model/serial rating plate. The model/serial rating plate is located under the console on the right-hand side.

■It is recommended that a 600 CFM or larger range hood be installed above the range.

■It is not recommended that a microwave hood combination be mounted above the range.

■Recessed installations must provide complete enclosure of the sides and rear of the range.

■To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5" (12.7 cm) beyond the bottom of the cabinets.

■All openings in the wall or floor where range is to be installed must be sealed.

■Do not seal the range to the side cabinets.

■Cabinet opening dimensions that are shown must be used. Given dimensions are minimum clearances.

■The anti-tip bracket must be installed. To install the anti-tip bracket shipped with the range, see “Install Anti-Tip Bracket” section.

■Grounded electrical supply is required. See “Electrical Requirements” section.

■Proper gas supply connection must be available. See “Gas Supply Requirements” section.

■Contact a qualified floor covering installer to check that the floor covering can withstand at least 200°F (93°C). Use an insulated pad or ¼" (0.64 cm) plywood over carpet and under range if installing range over carpeting.

IMPORTANT: To avoid damage to your cabinets, check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate or sustain other damage. This oven has been designed in accordance with the requirements of UL and CSA International and complies with the maximum allowable wood cabinet temperatures of 194°F (90°C).

Mobile Home - Additional Installation Requirements

The installation of this range must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280). When such standard is not applicable, use the Standard for Manufactured Home Installations, ANSI A225.1/NFPA 501A or with local codes.

In Canada, the installation of this range must conform with the current standards CAN/CSA-A240-latest edition, or with local codes.

Mobile home installations require:

■When this range is installed in a mobile home, it must be secured to the floor during transit. Any method of securing the range is adequate as long as it conforms to the standards listed above.

Product Dimensions

30" (76.2 cm) models

A

B

C

E

D

A. Island trim

B. 27¾" (70.5 cm) depth with control panel, see NOTE*

C. 35¾" (89.6 cm) cooktop height when setting on the wheels D. 30" (76.2 cm) width

E. Model/serial rating plate location

36" (91.4 cm) models

A

B

C

E

D

A. Island trim

B. 27¹⁄₈" (68.9 cm) depth with control panel, see NOTE*

C. 35¾" (90.2 cm) cooktop height when setting on the wheels D. 36" (91.4 cm) width

E. Model/serial rating plate location

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Installation Instructions Range Safety Your safety and the safety of others are very importantInstallation Requirements Tools and PartsMobile Home Additional Installation Requirements Product Dimensions 30 76.2 cm modelsMobile home installations require Location RequirementsCabinet Dimensions 48 121.9 cm modelsElectrical Requirements Gas Supply RequirementsType of Gas Natural GasGas Supply Pressure Testing Gas Supply LineGas Pressure Regulator Burner Input Rating AltitudeInstallation Instructions Install Anti-Tip BracketUnpack Range Measurement BFloor Mounting Make Gas ConnectionWall Mounting Install Griddle Verify Anti-Tip Bracket LocationLevel Range Complete ConnectionElectronic Ignition System Reinstall Kick Plate Complete InstallationIf you need Assistance or Service Check Operation of Oven Bake BurnersLP Gas Conversion GAS ConversionsTo Convert Gas Pressure Regulator Gas Supply Pressure Testing Pull electrode out of bracket Replace Oven Bake Burner Cover ABBAB C Pull electrode out of bracket To Convert Surface Burners Burner orifice spudComplete Installation Natural Gas Conversion Line pressure testing above ½ psi gauge 14 WCP Pull electrode out of bracket Replace Oven Bake Burner Cover AB C Pull electrode out of bracket 000 BTU 01 mm Small burners 15,000 BTU 75 mm Wiring Diagrams Atlas48 121.9 cm Oven Schematic for JGRP548 Model User Interface UI HMI KeyboardBurner Cooktop Schematic Strip CircuitsSW1 Sécurité DE LA Cuisinière Votre sécurité et celle des autres est très importanteExigences Dinstallation Outils et piècesExigences d’emplacement Dimensions du produit Modèles de 30 76,2 cmModèles de 36 91,4 cm Dimensions du placard Revêtement de hotte au-dessus de la cuisinière, suivre lesSpécifications de lalimentation en gaz Spécifications électriquesType de gaz Canalisation de gaz DétendeurDébit thermique des brûleurs Altitude Test de pressurisation de la canalisation de gazInstructions D’INSTALLATION Installation de la bride antibasculementDéballage de la cuisinière Mesure BMontage au plancher Raccordement au gazMontage au mur Vérification de lemplacement de la bride Antibasculement Installation de la plaque à frireRéglage de laplomb de la cuisinière Achever le raccordementSystème dallumage électronique Réinstallation du garde-pieds Réinstaller les vis au sommet du garde-piedsConversions Pour Changement DE GAZ Achever l’installationConversion pour lalimentation au propane Conversion du détendeur Test de pressurisation de la canalisation de gazCouvercle du brûleur de cuisson au four Dégager lélectrode du support Réinstaller le couvercle du brûleur de cuisson au four AB C Dégager lélectrode du support Conversion des brûleurs de surface Gicleur de brûleurAchever l’installation Conversion pour lalimentation au gaz naturel Déflecteur du four Écrous du déflecteur du four Lame plate puis retirer lélectrode Réinstaller le couvercle du brûleur de cuisson au four AB C Dégager lélectrode du support Réinstaller le couvercle du brûleur de cuisson au four 15 000 BTU 75 mm Schémas de câblage RemarquesSchéma du four de 48 121,9 cm pour modèle JGRP548 Interface Utilisateur IUSchémas des circuits Schéma de la table de cuisson à 4 brûleursSW2 Schéma de la table de cuisson à 6 brûleursW10394575A

W10394575A specifications

The Jenn-Air W10394575A is a premium kitchen appliance that embodies the fusion of design, functionality, and cutting-edge technology, elevating the cooking experience for culinary enthusiasts and home chefs alike. This product is designed to offer superior performance while enhancing the aesthetic appeal of modern kitchen spaces.

One of the standout features of the Jenn-Air W10394575A is its high-efficiency performance, which is driven by innovative technology that ensures consistent heating and cooking results. The appliance is equipped with powerful heating elements that provide quick responsiveness, reducing overall cooking time. With its precise temperature control, users can expect impeccable results in every dish, from delicate pastries to hearty casseroles.

A key characteristic of the Jenn-Air W10394575A is its elegant design, tailored to fit seamlessly into contemporary kitchen interiors. The sleek lines and high-quality materials used in its construction not only create a visually stunning appliance but also ensure durability and long-term reliability. The surface is designed for easy cleaning, allowing users to maintain its pristine appearance with minimal effort.

In addition to its aesthetic appeal, the Jenn-Air W10394575A also incorporates user-friendly features that enhance the cooking experience. Its intuitive interface includes a digital display and straightforward controls, making it easy for users to select their desired settings. The appliance offers multiple cooking modes, catering to various culinary techniques such as baking, broiling, and warming, which provides versatility for different cooking styles.

Safety is another priority in the design of the Jenn-Air W10394575A. The appliance comes equipped with advanced safety features, including automatic shut-off and cool-touch surfaces, ensuring a secure cooking environment. This attention to safety allows users—regardless of expertise—to cook with confidence.

Overall, the Jenn-Air W10394575A is a remarkable addition to any kitchen, combining stylish design, advanced technology, and practical features. It is ideal for anyone who appreciates quality and performance, transforming everyday cooking into a refined culinary experience. Whether you're preparing a casual family meal or hosting a dinner party, this appliance is designed to meet and exceed the needs of modern homeowners.
Top Page Image Contents