Jenn-Air Oven Connecting the Range, GAS Supply Connection, HOW to Remove Range for Servicing

Page 3
W A R N I N G
DISCONNECT ELECTRICAL SUPPLY BEFORE SERVICING THE APPLIANCE.

CONNECTING THE RANGE (cont)

Gas Supply

Installation of this range must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1- latest edition. In Canada the range must be installed in accordance with the current CGA Standard CAN/CGA-B149 - Installation Codes for Gas Burning Appliances and Equipment and/or local codes.

In The Commonwealth Of Massachusetts

This product must be installed by a licensed plumber or gas fitter when installed within the Commonwealth of Massachusetts. A “T” handle type manual gas valve must be installed in the gas supply line to this appliance. A flexible gas connector, when used, must not exceed a length of three (3) feet / 36 inches.

W A R N I N G

Gas leaks may occur in your system and result in a dangerous situation. Gas leaks may not be detected by smell alone. Gas suppliers recommend you purchase and install an UL approved gas detector. Install and use in accordance with manufacturer’s instructions.

GAS SUPPLY CONNECTION

A QUALIFIED SERVICEMAN OR GAS APPLIANCE INSTALLER MUST MAKE THE GAS SUPPLY CONNECTION. Leak testing of the appliance shall be conducted by the installer according to the instructions given in Step 9.

Apply a non-corrosive leak detection fluid to all joints and fittings in the gas connection between the supply line shut-off valve and the range. Include gas fittings and joints in the range if connections were disturbed during installation. Check for leaks! Bubbles appearing around fittings and connections will indicate a leak. If a leak appears, turn off supply line gas shut-off valve, tighten connections, turn on the supply line gas shut off valve, and retest for leaks.

CAUTION: NEVER CHECK FOR LEAKS WITH A FLAME. WHEN LEAK CHECK IS COMPLETE, WIPE OFF ALL RESIDUE.

NATURAL GAS SUPPLY LINE MUST HAVE A NATURAL GAS SERVICE REGULATOR. INLET PRESSURE TO THIS APPLIANCE SHOULD BE REDUCED TO A MAXIMUM OF 14 INCHES WATER COLUMN (0.5 POUNDS PER SQUARE INCH (P.S.I.) LIQUEFIED PETROLEUM (L.P.)/PROPANE GAS SUPPLY LINE MUST HAVE A L.P. GAS PRESSURE REGULATOR. INLET PRESSURE TO THIS APPLIANCE SHOULD BE REDUCED TO A MAXIMUM OF 14 INCHES WATER COLUMN (0.5 P.S.I.). INLET PRESSURES IN EXCESS OF 0.5 P.S.I. CAN DAMAGE THE APPLIANCE PRESSURE REGULATOR AND OTHER GAS COMPONENTS IN THIS APPLIANCE AND CAN RESULT IN A GAS LEAK.

Gas supply pressure for testing regulator must be at least 1” water column pressure above manifold pressure shown on serial plate.

Check Pressure of House Piping System

1.The appliance and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 lbs./sq. in. (3.5 kPa) (13.8 in. water column).

2.The appliance must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 lbs./sq. in. (3.5 kPa)

(13.8 in. water column).

A GAS SHUT-OFF VALVE SHOULD BE PUT IN AN ACCESSIBLE LOCATION IN THE SUPPLY LINE AHEAD OF THE RANGE, FOR TURNING ON AND TURNING OFF GAS SUPPLY. CONNECTOR NUTS MUST NOT BE CONNECTED DIRECTLY TO PIPE THREADS. THE CONNECTORS MUST BE INSTALLED WITH ADAPTORS PROVIDED WITH THE CONNECTOR.

The house piping and/or range connector used to connect the range to the main gas supply must be clean, free of metal shavings, rust, dirt and liquids (oil or water). Dirt, etc. in the supply lines can work its way into the range manifold and in turn cause failure of the gas valves or controls and clog burners and/or pilot orifices.

NOTE: It is recommended to use a new CSA certified 1/2” flexible connector no longer than 36” (91.4 cm) with a minimum BTU/HR rating of 60,000 be used. Rigid pipe may also be used.

HOW TO REMOVE RANGE FOR SERVICING

Follow these procedures to remove appliance for servicing:

1. Slide range forward to disengage range from the anti-tip bracket.

2. Shut off gas supply to appliance.

3. Disconnect electrical supply to appliance, if equipped.

4. Disconnect gas supply tubing to appliance.

5. Reverse procedure to reinstall. If gas line has been disconnected, check for gas leaks after reconnection.

6. To prevent range from accidentally tipping, range must be secured to the floor by sliding rear leveling leg into the anti-tip bracket.

NOTE: A qualified servicer should disconnect and reconnect the gas supply. The servicer MUST follow installation instructions provided with the gas appliance connector and the warning label attached to the connector.

SERVICE-PARTS INFORMATION

When your range requires service or replacement parts, contact your dealer or authorized service agency. Please give the complete model and serial number of the range which is located on front frame behind storage drawer.

Your range may not be equipped with some of the features referred to in this manual.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents REV 0-10/05 8101P701-60 Maytag CorporationRecreational Park Trailers Connecting the RangeR N I N G Mobile HomesGAS Supply Connection Connecting the RangeHOW to Remove Range for Servicing SERVICE-PARTS InformationMaisons Mobiles Pour Parc Récréatif Raccordement À LA CuisinièreAlimentation Électrique Maisons MobilesVérifiez la pression du système d’alimentation de la maison Renseignements SUR LES Services ET LES PiècesComment Déplacer LA Cuisinière Pour Procéder À L’ENTRETIEN Alimentation En GazSuministro Eléctrico Conexión DE LA EstufaCasas Rodantes Remolques RecreacionalesInformación Sobre LOS Repuestos Conexión DE LA EstufaConexión AL Suministro DE GAS Desinstalación DE LA Estufa Para Servicio183 Clearance DimensionsDégagements Dimensiones DE LOS Espacios DE Despeje76.30 2cm Dimensions/Dimensions/Dimensiones1cm 4cmHerramientas Necesarias Conversión en la parte trasera de la estufaIncluded./Compris./Se incluye Not Included./Non inclus./No se incluye90˚ Elbow/Coude de 90/ Codo de 90˚ Transition Reducer15.88 cm 89 cm Outlet Sortie Salida Inlet Entrée Admisión45.71 cm 22.86 cmVista superior View from motor side of blowerRemove 4 locknuts on motor side of blower Lift and rotate motor 90 degrees to repositionB10 Soporte de instalación Blower Electrical Connector Raccord électrique Conector eléctricoTop View/Vue de dessus/Vista superior Mounting bracketSerrez la pince du conduit Installation/Installation/InstalaciónCenter 14 1/4 36.19mm Tighten Duct ClampWall venting/Aération par le mur 12aRange Cuisinière Estufa 12b12c Insert filter./Insérez le filtre./Instale el filtroCorrect BON Correcto Flame Adjustment/Réglage de la flamme/Ajuste de la llama

Oven specifications

The Jenn-Air Oven is a hallmark of luxury and performance in contemporary kitchen appliances, designed to meet the demands of home chefs and culinary enthusiasts. With a seamless blend of cutting-edge technology and elegant design, Jenn-Air ovens elevate the cooking experience, making it both enjoyable and efficient.

One of the standout features of Jenn-Air ovens is their multi-mode cooking technology. This includes convection cooking, which circulates hot air for even baking and roasting, ensuring that dishes are cooked thoroughly and uniformly. The powerful heating elements allow for faster preheating times and precise temperature control, enhancing cooking performance.

The innovative Rapid Preheat feature is designed to get the oven ready in a fraction of the time. By utilizing both the upper and lower heating elements alongside the convection fan, home cooks can save time and get straight to meal preparation. This technology is particularly beneficial for those who lead busy lifestyles but still wish to create gourmet meals at home.

Jenn-Air ovens also come equipped with advanced controls and smart technology capabilities. Many models feature a state-of-the-art touch screen interface that provides intuitive navigation and control over cooking functions. This allows users to personalize their cooking settings and access a variety of pre-programmed recipes, turning the oven into a smart cooking companion.

In addition to technology, Jenn-Air emphasizes the importance of design and aesthetics. Their ovens are available in multiple finishes, including sleek stainless steel and beautiful black, to complement any kitchen décor. The seamless integration of design with functionality is a hallmark of the Jenn-Air brand, which appeals to consumers seeking both style and substance.

Another remarkable characteristic of Jenn-Air ovens is their additional cooking modes, such as steam baking and high-heat broiling. These functions provide versatility, allowing users to experiment with various cooking techniques, from baking artisan bread to broiling perfectly seared meats.

Lastly, easy-to-clean surfaces and self-cleaning options make maintenance a breeze, allowing users to spend more time enjoying their culinary creations rather than cleaning up afterwards. With its combination of advanced technologies, elegant design, and outstanding cooking performance, the Jenn-Air Oven stands as a credible choice for anyone looking to enhance their kitchen with a premium appliance.
Top Page Image Contents