Marmitek 121101 Universal remote 5in1, Clearing the memory master reset, Infrared extender

Page 10

6.3. Changing the code of the 5in1 remote for use with the CableLink 75

Remark: It is only necessary to change the code of the 5in1 remote if another CableLink 75 system is used in your immediate neighbourhood (within 100 meters).

The default setting of the remote is "636"

To change the code of both the 5in1 remote and your CableLink 75 system:

1.Press and hold SETUP until the LED stays on

2.Press CBL

3.Enter one of the following codes: 639 638 637

636 (default)

4.Switch the CableLink 75 transmitter off and then on again (by using the ON/OFF switch (7))

5.The following on screen text will appear: "HANDSET CODE ABC PRESS "SET" TO CHANGE OR ANY OTHER KEY TO CONTINUE"

6.Press "SET". The following on screen text will appear: "PRESS AGAIN TO CONFIRM"

7.Press "SET" again

8.The screen shows the following text: "CODE XYZ ACCEPTED" (e.g. code 638 accepted)

9.Test the connection by pressing CHAN+ or CHAN-

6.4. Clearing the memory (master reset)

1.Switch the CableLink 75 transmitter off and on again (by using the ON/OFF switch (7)).

2.Press the SOURCE and CHAN DOWN key (middle key) at the front of the transmitter at the same time

3.On screen the text "DELETED" will appear

7. Universal remote 5in1

The provided 5in1 remote does not only contain keys for your CableLink 75 system (read 5.4), you are also able to control your TV, VCR, DVD player and Satellite receiver with it! The remote is pre- programmed at the factory for most brands and models of equipment.

7.1. Infrared extender

Your CableLink 75 system has a build in infrared extender. This infrared extender lets you control your VCR, DVD player and Satellite receiver, which are set up at the transmitter side, through walls and floors.

To use the infrared extender, point your remote at the infrared receiver which is located behind the window at the front of the CableLink 75 receiver. The infrared extender will also work with the original remotes of your equipment (except 400kHz infrared systems like B&O).

To use the infrared extender you must have the infrared extension cable connected to the

10

MARMITEK

Image 10

Contents CABLELINK75 CABLELINK75 CableLink 75 system MultisourceControl Elements, Transmitter CableLink 75 TransmitterCableLink 75 Receiver Control Elements ReceiverInstallation of the system ScartVCR OUT SAT OUT In1 Remote Control Installation of the ReceiverCableLink 75 function keys on your 5in1 Remote Automatic channel search round channel numbers CableLink 75 channel set upManual search for all remaining channels +/- channels Method a scanning the complete frequency band Repeat steps 1 to 3 until you found all TV channelsUniversal remote 5in1 Clearing the memory master resetInfrared extender Chan + and Chan Button descriptions LED indicator lightSetting up for TV, VCR, DVD player and Satellite receiver VOL +Manual code search Press and release the Enter button to complete the setupAutomatic code search Poor quality of all TV channels Identifying codes found using the search procedureTroubleshooting Poor quality of some of the TV channelsRemote won’t work with the CableLink CableLink 75 Sender Transmitter Beschreibung des SystemsAnmerkung Bedienungselemente CableLink 75 Empfänger receiver433MHz-Antenne Installieren des Senders ohne fest aufgestellte Geräte Installation des Systems433MHz- Antenne Installieren des Senders mit fest aufgestellten Geräten Installieren des Empfängers In1 Fernbedienung für den CableLinkAutomatische Sendersuche ganze Kanalnummern Einstellen des SystemsAutomatisches Suchen Von Hand suchen nach allen übrigen Sendern +/- Kanäle Methode a Durchsuchen des gesamten FrequenzbereichesOder Löschen des SpeichersBeschreibung der Tasten LED-Anzeige Universalfernbedienung 5in1Infrarotverlängerung VOL+Teletext AN / Teletext AUS / Teletext Hold Schliesst das Menü des Gerätes, welches Sie bedienenCursortasten Setzt die aktuelle Seite festAutomatische Codesuche Codesuche von HandIdentifizierung der gefundenen Code Die Bildqualität einiger Sender ist schlecht ProblemlösungenDie Bildqualität aller Sender ist schlecht Die Infrarotverlängerung funktioniert nichtCableLink 75 zender transmitter Omschrijving van het systeemOpmerking CableLink 75 Ontvanger receiver BedieningselementenZender te richten Installatie van het systeemEr gaat geen indicator branden als de ontvanger aan staat Van de zender en de ontvanger dienen overeen te komenInstalleren van de zender met lokaal opgestelde apparatuur Volgende TV kanaal kiezen Installeren van de ontvangerIn1 afstandsbediening voor de CableLink Vorige TV kanaal kiezenInstellen van het systeem Automatisch zoeken naar zenders hele kanaalnummersHandmatig zoeken naar alle overige zenders +/- kanalen Methode a doorzoeken van de complete frequentiebandTV zender op deze frequentie Channel NameHet wissen van het geheugen Universele afstandsbediening 5in1Omschrijving van de toetsen LED indicatielampje Teletekst AAN / Teletekst UIT / Teletekst Hold Sluit het menu van het apparaat wat u bedientCursor toetsen Zet de huidige pagina vastAutomatisch zoeken naar codes Handmatig zoeken naar codesIdentificatie van de gevonden codes De beeldkwaliteit van sommige zenders is slecht Oplossen van problemenDe beeldkwaliteit van alle zenders is slecht De infraroodverlenger werkt nietCablelink Frequency CableLink Channel MHz Channel Nr Name Frequency CableLink Channel MHz Channel Nr Name Frequency CableLink Channel MHz Channel Nr Name Technical Data Im Freien, 20 40 m durch Decken und WändeCABLELINK75