Jenn-Air W10253462A Complete Installation, Moving the Range, If you need Assistance or Service

Page 21

12.Insert downdraft vent filter and place vent cover over opening.

B

A

A.Filter

B.Grate

13.Reconnect power.

Complete Installation

1.Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.

2.Check that you have all of your tools.

3.Dispose of/recycle all packaging materials.

4.Check that the range is level. See “Connect Range to Downdraft System.”

5.Use a mild solution of liquid household cleaner and warm water to remove waxy residue caused by shipping material. Dry thoroughly with a soft cloth. For more information, read the “Range Care” section of the Use and Care Guide.

6.Read “Range Use” in the range Use and Care Guide.

7.Turn on surface burners and oven. See the Use and Care Guide for specific instruction on range operation.

If range does not operate, check the following:

■Household fuse is intact and tight; or circuit breaker has not tripped.

■Range is plugged into an outlet.

■Electrical supply is connected.

■See “Troubleshooting” in the Use and Care Guide.

When the range has been on for 5 minutes, check for heat. If range is cold, turn off the range and contact a qualified technician.

8.Use the Flow Tester Card provided with your range to check the airflow (see card for step-by-step instructions).

If there is not sufficient airflow, review the “Venting Requirements” and “Venting Methods” sections.

If you need Assistance or Service:

Please reference the “Assistance or Service” section of the Use and Care Guide or contact the dealer from whom you purchased your range.

Moving the Range

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Connect anti-tip bracket to rear range foot.

Reconnect the anti-tip bracket, if the range is moved.

Failure to follow these instructions can result in death or serious burns to children and adults.

When moving range, slide range onto cardboard or hardboard to avoid damaging the floor covering.

If removing the range is necessary for cleaning or maintenance:

For power supply cord-connected ranges:

1.Disconnect range from downdraft vent system.

2.Slide range forward.

3.Unplug the power supply cord.

4.Complete cleaning or maintenance.

5.Plug in power supply cord

6.Check that anti-tip bracket is installed, remove access panel and use a flashlight to look underneath the bottom of the range:

■Look for the anti-tip bracket securely attached to floor or wall.

■Slide range back so rear range foot is under anti-tip bracket.

7.Check that range is level.

8.Reconnect range to downdraft vent system.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Table of Contents/Table des matières Your safety and the safety of others are very important Range SafetyInstallation Requirements Tools and PartsLocation Requirements Product Dimensions Cabinet Dimensions Venting Methods Venting RequirementsWall Venting Floor VentingConcrete Slab Installations Exhaust Through Window Well Concrete Slab Installations Exhaust Through WallCalculating Vent System Length Left or Right Side VentingElectrical Requirements U.S.A. Only If connecting to a 4-wire systemExample vent system Electrical ConnectionIf connecting to a 3-wire system Electrical Requirements Canada OnlyCountertop Preparation Adjust Leveling Legs Installation InstructionsInstall Anti-Tip Bracket Unpack RangeInstall Downdraft System Determine Equivalent Length of Vent SystemRear Wall Venting Go to the Electrical Connection section View from Motor Side of Blower Wood spacers Mounting bracket Blower Direct Wire Power Supply CordStyle 1 Power supply cord strain relief Electrical Connection U.S.A. OnlyStyle 2 Direct wire strain relief Wire connection Power Supply Cord Wire Connection Direct Wire Wire Awg Torque Bare Wire Torque SpecificationsConnect Range to Downdraft System Side Venting left side venting shown Wall Venting Top View Floor VentingIf you need Assistance or Service Complete InstallationFor power supply cord-connected ranges Moving the RangeFor direct-wired ranges Votre sécurité et celle des autres est très importante Sécurité DE LA CuisinièreExigences D’INSTALLATION Exigences d’emplacementOutils et pièces Dimensions du produit Dimensions du placardExigences concernant l’évacuation Installations dans les régions au climat froidPour obtenir des performances optimales Air d’appointMéthodes d’évacuation Installations sur dalle de béton Évacuation par le murÉvacuation par le plancher Évacuation par la gauche ou par la droiteExemple de circuit d’évacuation Calcul de la longueur effective du circuit d’évacuationComposant Conduit de diamètre de 15,2 cm Longueur maximum = 60 pi 18,3 mPréparation du plan de travail Spécifications électriquesInstructions D’INSTALLATION Déballage de la cuisinièreRéglage des pieds de nivellement Installation de la bride antibasculement Installation du circuit d’évacuation Par le basDéterminer la longueur équivalente du circuit d’évacuation Vue de dessus Évacuation par le mur arrière22,8 cm Vue du ventilateur côté moteur Placer 2 cales en bois et les fixer au sol Évacuation par le plancher Vue de dessus Évacuation par le mur Vue de dessusSi vous avez besoin d’assistance ou de service Achever l’installationDéplacement de la cuisinière Pour les cuisinières avec câblage directCuisinières alimentées par cordon d’alimentation Page 2009 All rights reserved W10253462A

W10253462A specifications

The Jenn-Air W10253462A is a highly regarded appliance in the realm of kitchen innovation. This sophisticated range is known for its blend of style, versatility, and cutting-edge technology, making it an essential addition for both cooking enthusiasts and professional chefs alike.

One of the main features of the W10253462A is its powerful induction cooking capabilities. Induction cooking utilizes electromagnetic energy to heat pots and pans directly, resulting in faster cooking times and improved energy efficiency. This technology not only reduces cooking time but also provides precise temperature control, allowing for a seamless cooking experience. Additionally, the smooth surface of the induction cooktop makes it easy to clean, as spills can be wiped away without difficulty.

Another standout characteristic of the W10253462A is its oven performance. This model typically includes a convection oven which circulates hot air for even cooking results. The convection feature ensures that meals are cooked evenly, reducing the chances of hot spots and undercooked areas. Furthermore, with multiple cooking modes, users can roast, bake, or broil with ease, providing versatility for various recipes.

The appliance often includes advanced safety features as well. For example, the induction cooktop generally comes with automatic shut-off functionality, which turns off the burners if no cookware is detected, ensuring peace of mind when cooking. Additionally, child lock settings are available, making this range a safe option for families.

In terms of aesthetics, the Jenn-Air W10253462A typically boasts a sleek, modern design that complements any kitchen decor. The stainless steel finish not only enhances its visual appeal but also contributes to its durability and resistance to smudges and fingerprints.

Moreover, the appliance often incorporates smart technology, allowing users to control their cooking settings remotely through a smartphone app. This innovation not only increases convenience but also enables users to monitor their dishes' progress from anywhere in the house.

The Jenn-Air W10253462A is truly a blend of sophisticated design and advanced technology, suitable for anyone looking to enhance their cooking experience. With its induction cooking, advanced oven features, safety mechanisms, and smart capabilities, this appliance stands out as a top choice for modern kitchens.
Top Page Image Contents