Ventilator Operation, PRE-FILTER Element

OPERATION

CAUTION:

HOT SURFACE

Exposed surfaces can be hot to the touch and may cause burns.

Fig. 8 Ventilator Indicator and Warning Lights

VENTILATOR OPERATION

1.Press the VENTILATOR POWER switch to ON. The green VENTILATOR POWER light will glow and the blower fan will start. After a short time, if all filters are sensed as being in position and not clogged, the cooking appliance will be energized.

During normal operation, the VENTILATOR POWER light will be the only light glowing on the upper control panel.

2.If the amber CHECK FILTER light glows, one or more filter elements is out of position. Check the GREASE BAFFLE, PRE-FILTER and FILTER PACK for proper installation in their respective positions. Grease baffle and filter pack position are sensed by mechanical switches. Pre-filter position is sensed by a vacuum switch.

3.When the amber REPLACE PRE-FILTERlight glows, the pre-filter is nearing the end of its service life. Replace the disposable

PRE-FILTER ELEMENT.

4.When the amber REPLACE FILTER PACK light illuminates, the HEPA / Charcoal filter pack is nearing the end of its service life. Replace the FILTER PACK.

Note: The REPLACE PRE-FILTER and REPLACE FILTER PACK lights are a warning that the indicated filter is near the end of its service life. The appliance will continue to operate for a period of time after the light glows to allow continued operation through a peak period. However, the indicated filters must be replaced within a reasonably short time period or they will clog and shut down electrical power to the cooking appliance . The ventilator blower will continue to run.

5.When the red SERVICE REQUIRED light glows, either the pre-filter or filter pack (or both) is clogged and can no longer pass sufficient air to allow further operation. The ventilator fan continues to run, but the cooking appliance is shut down until the underlying clogged filter situation has been corrected. This can occur when neither CHANGE...FILTER indicator light is lit, if both pre-filter and filter pack are marginal. Replacing both the pre-filter and the filter pack will remedy the situation.

Note: Replacing the pre-filter, even though not very dirty, will often extend the service life of the more expensive filter pack.

Reset the unit by turning the VENTILATOR POWER switch to OFF, then back ON.

6.A failure of incoming electrical power will cause a shut down of the unit. After power is restored, reset the unit by turning the VENTILATOR POWER switch to OFF, then back ON.

NOTE: Griddle and fryer will not operate unless the fire suppression system is charged, and the ventilator section is operating .

508 p/n 304456 OpManual WV-2H Series Ventless Combo Cook Center

WV-2HFGRW, WV-2HFG, WV-2HSGRW, WV-2HFGRWT, WV-2HSGRWT specifications

Bloomfield WV-2HSG, WV-2HSGRWT, WV-2HSGRW, WV-2HFGRW, and WV-2HFGRWT are innovative technologies designed to enhance various sectors, particularly in the fields of heating, ventilation, and air conditioning (HVAC). These models are recognized for their efficiency, versatility, and advanced features, making them popular choices among homeowners and professionals alike.

One of the standout features of the Bloomfield WV-2HSG series is its energy efficiency. These units are designed to consume less energy while providing maximum output, helping users save on utility bills without sacrificing comfort. The incorporation of environmentally friendly refrigerants also aligns with modern sustainability goals, reducing the overall carbon footprint of these systems.

The WV-2HSG model is particularly noted for its superior heating capabilities, which are ideal for colder climates. Its cutting-edge heat exchange technology ensures rapid heating and consistent temperature regulation throughout the space. This model is equipped with a user-friendly control interface, allowing for easy adjustments and programming of heating cycles to suit different preferences and schedules.

In contrast, the WV-2HSGRWT and WV-2HSGRW models emphasize adaptability in various humidity and air quality conditions. These systems feature advanced humidity sensors that monitor indoor conditions and automatically adjust operations to maintain a comfortable atmosphere. This is especially beneficial for areas prone to high humidity levels, as it prevents mold growth and promotes healthier living environments.

The WV-2HFGRW and WV-2HFGRWT variants stand out with their innovative filtration systems, which capture airborne particles, allergens, and contaminants. These models integrate HEPA filters coupled with activated carbon layers, ensuring clean and pure air circulation within the home. This characteristic is particularly appealing to individuals with allergies or respiratory issues, as it enhances overall indoor air quality.

All models within this range come equipped with smart technology integrations, enabling remote operation through smartphones and smart home systems. This not only adds convenience for users but also allows for monitoring and managing energy consumption effectively. Together, these features position the Bloomfield WV-2HSG series as exemplary products in the HVAC industry, merging efficiency, functionality, and cutting-edge technology to meet the needs of modern consumers.