Bloomfield 2030 owner manual Servicing Instructions Plumbing, Function

Page 14

SERVICING INSTRUCTIONS — PLUMBING

FUNCTION

1.Water enters at the inlet fitting of the fill solenoid (32). The solenoid admits water via a command from the controller.

NOTE: The solenoid has an internal strainer. To clean the

strainer: Shut off water supply. Unscrew the plastic cap protruding from the rear of the brewer. Remove the cap, inlet fitting and washer. With pliers, grasp the bar of the strainer and pull straight out. Wash any debris from the strainer. Note orientation - DO NOT reverse strainer.

Reassemble and reinstall. Turn water supply back on.

2.Water is diverted to the spout assembly (51) thru the bypass hose (52.

3.Water enters the tank (2) thru the fill tube (16). Water is heated in the tank by the heating element (15).

4.The tank lid (9) is sealed around the edge with a gasket (6), and is secured by 3 clips (10).

5.Heated water is dispensed to the brew head through the brew tube (14), brew solenoid (18), and spout of the brew fitting (19). The brew solenoid is energized during the brew cycle by the controller.

NOTE: The flow rate of the brew solenoid is factory set. DO NOT adjust.

6.Hot water is sprayed over the coffee grounds by the spray disc (24), which is sealed to the brew head by a gasket (23).

7.The tank is vented through the vent elbow fitting (40) and vent tubes (11 & 13).

8.Water for the hot water faucet (1) is supplied from the tank through the faucet supply tube (12).

12

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 653 Warranty Statement Table of Contents SpecificationsFeatures and Operating Controls Precautions and General Information Electrical DamageEquipment Hazard Installation InstructionsPLUMBER’S Installation Instructions Unpacking & Initial InspectionInstallation Instructions ELECTRICIAN’S Installation InstructionsOperation Operating InstructionsOperation Burn HazardProgramming Features and Options Clock Operation Cleaning Instructions Electric Shock HazardServicing Instructions Plumbing FunctionServicing Instructions Plumbing Description Part N0 Used onServicing Instructions Electrical Risk of InjuryServicing Instructions Electrical Servicing Instructions DE-LIMING Heater Tank Burn HazardTroubleshooting Suggestions Cause Suggestions for Remedial ActionCheck Data Revision Entering Test Program ModeMax T Test Program TimeBrew Cancel ON/OFF Exploded View & Parts List Exploded View & Parts List Wiring Diagrams Page Telephone Fax

2030 specifications

Bloomfield 2030 is an ambitious vision for the future of urban living, focusing on sustainability, connectivity, and enhanced quality of life for its residents. This forward-thinking initiative aims to transform Bloomfield into a model smart city, integrating advanced technologies and innovative practices to create a vibrant community.

One of the main features of Bloomfield 2030 is its commitment to sustainability. The city plans to implement green infrastructure, including extensive urban parks, green roofs, and vertical gardens. These initiatives will promote biodiversity, improve air quality, and reduce urban heat. Additionally, renewable energy sources such as solar and wind power will be harnessed to meet the city's energy needs, with the goal of achieving net-zero emissions by 2030.

Another key characteristic of Bloomfield 2030 is its focus on smart technology. The city will leverage Internet of Things (IoT) devices to enhance urban services and improve the overall efficiency of municipal operations. Smart traffic management systems will optimize traffic flow and reduce congestion, while connected sensors will monitor air quality and noise levels to help maintain a healthy environment. Public safety will be enhanced through the use of smart surveillance and emergency response systems, ensuring residents feel secure in their community.

In addition to environmental and technological advancements, Bloomfield 2030 places a strong emphasis on community engagement and inclusivity. The city plans to incorporate citizen feedback into urban planning initiatives, fostering a sense of ownership and belonging among residents. Diverse housing options, including affordable units and co-housing projects, will cater to a wide range of demographics, ensuring that all community members have access to quality living conditions.

Transportation will also undergo significant transformations under the Bloomfield 2030 plan. The city aims to promote active transportation methods, such as walking and cycling, by developing extensive bike lanes and pedestrian pathways. Additionally, a robust public transit system will connect different neighborhoods, reducing reliance on personal vehicles and lowering carbon emissions.

In summary, Bloomfield 2030 represents a futuristic vision of urban development that prioritizes sustainability, smart technology, community involvement, and efficient transportation. By embracing these principles, Bloomfield will create a thriving, inclusive, and resilient city that meets the needs of its residents while protecting the environment for future generations.
Top Page Image Contents