Fill Product Hoppers, Install Product Hoppers

OPERATION (continued)

NOTE: Hoppers and motors for various products are essentially identical. In a cold / hot dispensing mode, the cold product must be placed in the left dispenser only. Otherwise, product may be placed in and dispensed from either hopper.

SUGGESTION: For easy identification of the hopper contents, a 2” strip of “frosty” tape placed on the front of the hopper is a handy place to write the contents name.

NOTE:

Keep front door closed when operating dispenser. This prevents excessive steam and humidity from entering the hopper compartment.

FILL PRODUCT HOPPERS

1.Hoppers and covers should be thoroughly washed and dried. Examine hoppers for completeness and proper assembly prior to placing them into service.

2.Fill the hopper with the desired product powder and install the hopper cover.

3.Apply the appropriate label to the door assembly, above the touch pad keys, from the provided sheet of labels. Additional labels are available from your Authorized Bloomfield Distributor.

INSTALL PRODUCT HOPPERS

1.Manually position the U-Shaped clevis HORIZONTALLY so that it will engage with the drive motor drive pin when it is installed in the hopper compartment. See illustration below.

2.Press the appropriate selection key to position the motor drive pin VERTICALLY so that it will engage with the hopper clevis without interfering with the hopper sliding to its full rear position.

3.Insert the hopper mounting tray by setting it over the mounting lugs, then pulling it as far forward as it will go. The tray should lay flat against the bottom of the dispenser inner cavity.

4.Slide the hopper against the side rail of the mounting plate. Slightly lift up the front of the hopper while pushing it back until the back edge of the hopper slips under the mounting lug on the rear floor of the inner compartment.

NOTE: In the illustration, the clevis and drive pin are shown rotated and engaged. To install the hopper, the clevis should be horizontal, and the drive pin vertical.

5.Place cup under blender spout, dispense and discard a serving from each hopper to prime the system.

9456, 9454 specifications

Bloomfield 9454 and 9456 are two robust technologies that stand out in the realm of modern industrial design and automation, catering to diverse sectors such as manufacturing, logistics, and data management. These systems are distinguished by their innovative features, cutting-edge technologies, and impressive characteristics, making them essential components for industries aiming to enhance efficiency and streamline operations.

The Bloomfield 9454 is primarily characterized by its modular architecture, allowing businesses to adapt the system according to their specific requirements. This flexibility enables quick upgrades and scaling, ensuring that users can easily incorporate new functionalities without extensive downtime. Additionally, the 9454 is equipped with high-performance processors that deliver swift data processing and real-time analytics, facilitating informed decision-making processes.

On the other hand, Bloomfield 9456 takes a more integrated approach. It combines both hardware and software solutions, creating a unified platform that enhances operational coherence. The 9456 features advanced machine learning algorithms that optimize production workflows by predicting maintenance needs and analyzing performance metrics. This proactive approach not only minimizes unexpected disruptions but also enhances overall productivity.

Both systems boast user-friendly interfaces that facilitate ease of operation, ensuring minimal training time for personnel. The intuitive dashboards provide clear visualizations of critical data, enabling operators to monitor performance metrics at a glance. In terms of connectivity, Bloomfield 9454 and 9456 come equipped with robust IoT capabilities, promoting seamless integration with existing machinery and enterprise systems. This interconnectedness is essential for fostering a cohesive operational ecosystem, allowing for efficient communication and data sharing across the enterprise.

Moreover, both Bloomfield technologies prioritize security, incorporating advanced cybersecurity measures to protect sensitive data from potential threats. As industries increasingly pivot towards automated solutions, the demand for secure and reliable systems has never been higher.

Ultimately, Bloomfield 9454 and 9456 represent the pinnacle of technological innovation in industrial automation. Their unique features, combined with a focus on adaptability, performance, and security, make them indispensable tools for companies aiming to remain competitive in an ever-evolving marketplace. Organizations looking to enhance their operational efficiency and embrace the capabilities of advanced technologies would do well to consider the transformative potential of these Bloomfield systems.