Bloomfield 9311 owner manual Servicing Instructions, Brew Timer Adjustment

Page 14

SERVICING INSTRUCTIONS (continued)

CAUTION:

SHOCK HAZARD

Disconnect brewer from electric power before opening the access panel.

Adjustments to be performed by qualified technician only.

NOTE:

Brewer is pre-adjusted to deliver 1/2, 1 and 1-1/2 gallons of coffee at a water pressure of 50 p.s.i. Use this procedure to adjust the delivered volume to suit local conditions.

BREW TIMER ADJUSTMENT

PRECAUTIONS:

Disconnect brewer from electric power.

 

Allow brewer to cool.

FREQUENCY:

As required to adjust delivered volume

TOOLS:

Phillips head screwdriver

 

Small flathead screwdriver

 

Satellite or other container to calibrate volume

 

 

 

 

1.Press HEATER ON/OFF switch to OFF. Disconnect brewer from electrical power.

2.Remove TOP PANEL. Operating controls are accessible through the top panel only.

3.Adjust the BREW TIMER setting. NOTE: Each volume has its own setting:

L = 1-1/2 gallon (adjusts from 218 to 398 seconds) M = 1 gallon (adjusts from 252 to 372 seconds)

S = 1/2 gallon (adjusts from 92 to 212 seconds)

Turn CLOCKWISE to increase time;

Turn COUNTER-CLOCKWISEto decrease time.

Adjust only in small increments to avoid large volume variations. Recommend adjustments be made in 1/32 turn increments, and no more than 1/16 turn at a time.

4.Replace TOP PANEL. Turn TANK HEATER switch ON. Reconnect brewer to electrical power.

5.Allow the brewer to come up to brewing temperature, then perform a test brew. Check delivered volume. Readjust as necessary.

661

When desired volume is achieved, procedure is complete.

12

74415 9311 Single Satellite Brewer

Page 13 Page 15
Image 14
Page 13 Page 15
Contents For WithWarranty Statement Table of Contents SpecificationsFeatures and Operating Controls Features and Operating Controls Agency Approval Information General Information and PrecautionsBurn Hazard PLUMBER’S Installation Instructions Installation InstructionsInstall Legs Level the UnitElectric Shock Hazard Installation InstructionsELECTRICIAN’S Installation Instructions Initial SET-UP Instructions2 GAL Operating InstructionsBrewing Coffee HOT Water Faucet Operating InstructionsBrew & Bypass Procedure Clean Coffee Brewer Cleaning InstructionsElectric Shock Hazard Cleaning InstructionsProcedure Clean Satellite Temperature Adjustment Servicing InstructionsBrew Timer Adjustment Servicing InstructionsQuality Timer Adjustment Procedure Delime the Water Tank Chemical Burn HazardServicing Instructions Troubleshooting Suggestions Symptom Possible Cause Suggested RemedyTroubleshooting Suggestions Model 9311 Exploded View Model 9311 Parts List Wiring Diagram 9340 120 Satellite Exploded View & Parts ListModel Volts Watts Telephone Fax

9311 specifications

Bloomfield 9311 is a cutting-edge agricultural tool designed to elevate efficiency and productivity in modern farming practices. This innovative machine is engineered to cater to a variety of agricultural needs, focusing on precision farming, sustainability, and versatility.

One of the standout features of the Bloomfield 9311 is its advanced precision agriculture capabilities. Equipped with state-of-the-art GPS technology, this machine allows for precise field mapping, enabling farmers to identify optimal planting, irrigation, and harvesting strategies. This level of precision not only maximizes yield but also minimizes unnecessary resource use, contributing to sustainable farming practices.

The Bloomfield 9311 is powered by a robust, fuel-efficient engine that ensures reliability and performance in the field. This engine technology is coupled with an advanced transmission system that enhances speed and control, making it suitable for various terrains and crop types. The machine is designed to handle changes in field conditions seamlessly, ensuring that farmers can operate efficiently regardless of weather or soil variability.

An essential characteristic of the Bloomfield 9311 is its modular design, allowing for easy customization and upgradeability. Farmers can equip the machine with different attachments based on their specific operational needs, whether it’s plowing, seeding, or harvesting. This flexibility means that the investment in the Bloomfield 9311 can adapt to changing agricultural practices or crop types over time.

In terms of technology, the Bloomfield 9311 integrates data analytics tools that provide real-time feedback and insights. This feature allows farmers to monitor the machine's performance and track field conditions, leading to informed decision-making. Additionally, the machine is designed to be user-friendly, with intuitive controls and an ergonomic cab that enhances operator comfort and productivity.

Moreover, Bloomfield's commitment to environmental sustainability is reflected in the design of the 9311. With reduced emissions and enhanced fuel efficiency, the machine aligns with the growing emphasis on eco-friendly farming solutions. By investing in the Bloomfield 9311, farmers not only benefit from improved operational efficiency but also contribute to a more sustainable agricultural future.

In conclusion, the Bloomfield 9311 stands out as a revolutionary tool in the agricultural sector. With its precision farming capabilities, adaptable design, advanced engineering, and commitment to sustainability, it is poised to become a staple in modern farming operations, empowering farmers to meet the demands of an ever-changing agricultural landscape.
Top Page Image Contents