Installation Instructions, Install Legs | Bloomfield 9311 specification

INSTALLATION INSTRUCTIONS

661 74415 9311 Single Satellite Brewer

INSTALL LEGS

The brewer is provided with adjustable legs and rubber feet. Be sure the legs are securely screwed into the base of the brewer, and that the rubber feet are properly installed.

LEVEL THE UNIT

The adjustable legs allow the brewer to be leveled. Set the brewer in its ultimate operating location and check for level with a spirit level Adjust the brewer for level from front-to-rear, and from side- to-side. Be sure all four feet rest firmly on the counter.

PLUMBER’S INSTALLATION INSTRUCTIONS

IMPORTANT:

This equipment must be installed in accordance with the Basic Plumbing Code of the Building Officials and Code Administrators International (BOCA), and the Food Service Sanitation Manual of the Food and Drug Administration (FDA). Also, this equipment installation must comply with all local plumbing codes and ordinances.

IMPORTANT:

Brewer must be installed on a water line with a full-flow pressure between 20 psi and 90 psi.

NOTE: If water pressure varies greatly, or exceeds 90 psi at any time, a water pressure regulator must be installed. Plumbing installer must supply the regulator.

Brewer must be connected to a potable water supply. Bloomfield recommends not less than 1/4” copper tubing for installations of 12’ or less, and not less than 3/8” copper tubing for installations exceeding 12’. Brewer must be connected to a COLD water line.

NOTE: DO NOT use a saddle tap for this water line connection.

A shut-off valve must be installed between the main water supply and the brewer. Plumbing installer must supply the shut-off valve. A 1/4-turn ball valve is recommended.

Bloomfield highly recommends the use of the provided water strainer to help prevent deposits in the brewing system.

Fig. 3 Water Line Installation

Flush the water line before connecting to the brewer.

CAUTION:

Hazard from

Unstable Equipment

Rubber feet must be installed on each leg of the brewer. Legs must be adjusted so that all four feet rest firmly on the counter. Failure to properly install the feet can result in movement of the brewer, which can cause personal injury and/ or damage to the brewer.

SCREW INTO

BREWER

FRAME

ADJUST

FOR

HEIGHT

ATTACH

RUBBER

FEET

Fig. 2 Adjustable Legs

IMPORTANT:

In some areas, local codes require a backflow preventer (check valve) to be installed on the inlet water line. If a back- flow preventer is used, you must install a water hammer arrester in the incoming line, between the backflow preventer and the brewer inlet, as far away from the brewer as space will allow. This will relieve the excessive back pressures that can cause faucet leaks and solenoid malfunctions.

9311 specifications

Bloomfield 9311 is a cutting-edge agricultural tool designed to elevate efficiency and productivity in modern farming practices. This innovative machine is engineered to cater to a variety of agricultural needs, focusing on precision farming, sustainability, and versatility.

One of the standout features of the Bloomfield 9311 is its advanced precision agriculture capabilities. Equipped with state-of-the-art GPS technology, this machine allows for precise field mapping, enabling farmers to identify optimal planting, irrigation, and harvesting strategies. This level of precision not only maximizes yield but also minimizes unnecessary resource use, contributing to sustainable farming practices.

The Bloomfield 9311 is powered by a robust, fuel-efficient engine that ensures reliability and performance in the field. This engine technology is coupled with an advanced transmission system that enhances speed and control, making it suitable for various terrains and crop types. The machine is designed to handle changes in field conditions seamlessly, ensuring that farmers can operate efficiently regardless of weather or soil variability.

An essential characteristic of the Bloomfield 9311 is its modular design, allowing for easy customization and upgradeability. Farmers can equip the machine with different attachments based on their specific operational needs, whether it’s plowing, seeding, or harvesting. This flexibility means that the investment in the Bloomfield 9311 can adapt to changing agricultural practices or crop types over time.

In terms of technology, the Bloomfield 9311 integrates data analytics tools that provide real-time feedback and insights. This feature allows farmers to monitor the machine's performance and track field conditions, leading to informed decision-making. Additionally, the machine is designed to be user-friendly, with intuitive controls and an ergonomic cab that enhances operator comfort and productivity.

Moreover, Bloomfield's commitment to environmental sustainability is reflected in the design of the 9311. With reduced emissions and enhanced fuel efficiency, the machine aligns with the growing emphasis on eco-friendly farming solutions. By investing in the Bloomfield 9311, farmers not only benefit from improved operational efficiency but also contribute to a more sustainable agricultural future.

In conclusion, the Bloomfield 9311 stands out as a revolutionary tool in the agricultural sector. With its precision farming capabilities, adaptable design, advanced engineering, and commitment to sustainability, it is poised to become a staple in modern farming operations, empowering farmers to meet the demands of an ever-changing agricultural landscape.