Bloomfield 9311 owner manual Warranty Statement

Page 2

WARRANTY STATEMENT

All electrical equipment manufactured by BLOOMFIELD INDUSTRIES is warranted against defects in materials and workmanship for a period of one year from the date of original installation or eighteen (18) months from the date of shipment from our factory, whichever comes first, and is for the benefit of the original purchaser, except that:

a.airpots carry a 30 day parts warranty only.

b.dispensers; i.e., tea and coffee carry a 90 days parts warranty only, excludes decanters.

THE FOREGOING OBLIGATION IS EXPRESSLY GIVEN IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY EXCLUDED.

BLOOMFIELD INDUSTRIES DIVISION / SPECIALTY EQUIPMENT MANUFACTURING CORPORATION SHALL NOT BE LIABLE FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES FROM ANY CAUSE WHATSOEVER.

This warranty is void if it is determined that upon inspection by an Authorized Service Agency that the equipment has been modified, misused, misapplied, improperly installed, or damaged in transit or by fire, flood or act of God.

It also does not apply if the serial nameplate has been removed or unauthorized service personnel perform service. The prices charged by Bloomfield Industries for its products are based upon the limitations in this warranty. Seller’s obligation under this warranty is limited to the repair of defects without charge by a Bloomfield Industries Authorized Service Agency or one of its sub-agencies. This service will be provided on customer’s premises for non-portable models. Portable models (a device with a cord and plug) must be taken or shipped to the closest Authorized Service Agency, transportation charges prepaid, for services.

In addition to restrictions contained in this warranty, specific limitations are shown below (Additional Warranty Exclusions). Bloomfield Industries Authorized Service Agencies are located in principal cities.

This warranty is valid in the United States and void elsewhere. Please consult your classified telephone directory or your food service equipment dealer; or, for information and other details concerning warranty, write to:

Service Parts Department

Bloomfield Industries

P.O. Box 280

Verdi, NV 89439

 

Phone: (888) 4929-2782

Fax: (888) 492-2783

SERVICE POLICY AND PROCEDURE GUIDE ADDITIONAL WARRANTY EXCLUSIONS

1.Resetting of safety thermostats, circuit breakers, overload protectors, or fuse replacements unless warranted conditions are the cause.

2.All problems due to operation at voltages other than specified on equipment nameplates; conversion to correct voltage must be the customer’s responsibility.

3.All problems due to electrical connections not made in accordance with electrical code requirements and wiring diagrams supplied with the equipment.

4.Replacement of items subject to normal wear, to include such items as knobs and light bulbs. Normal maintenance functions including adjustment of thermostats, microswitches, and replacement of fuses and indicating lights are not covered under warranty.

5.All problems due to inadequate water supply, such as fluctuating, or high or low water pressure.

6.All problems due to mineral/calcium deposits, or contamination from chlorides/chlorines. De-liming is considered a preventative maintenance function and is not covered by warranty.

7.Full use, care and maintenance instructions are supplied with each machine. Those miscellaneous adjustments noted are customer responsibility. Proper attention will prolong the life of the machine.

8.Travel mileage is limited to sixty (60) miles from an authorized Service Agency or one of its sub-agencies.

9.All labor shall be performed during normal working hours. Overtime premium shall be charged to the customer.

10.All genuine Bloomfield replacement parts are warranted for ninety (90) days from date of purchase on non- warranted equipment. Any use of non-genuine Bloomfield parts completely voids any warranty.

11.Installation, labor and job check-out are not considered warranty.

12.Charges incurred by delays, waiting time or operating restrictions that hinder the service technicians ability to perform services are not covered by warranty. This includes institutional and correctional facilities.

661 74415 9311

SHIPPING DAMAGE CLAIMS PROCEDURE

Single

NOTE: For your protection, please note that equipment in this shipment was carefully inspected and packaged by skilled personnel before leaving the factory.

Upon acceptance of this shipment, the transportation company assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1.VISIBLE LOSS OR DAMAGE: Be certain that any visible loss or damage is noted on the freight bill or express receipt, and that the note of loss or damage is signed by the delivery person.

2.FILE CLAIM FOR DAMAGE IMMEDIATELY: Regardless of the extent of the damage.

3.CONCEALED LOSS OR DAMAGE: if damage is unnoticed until the merchandise is unpacked, notify the transportation company or carrier immediately, and file “CONCEALED DAMAGE” claim with them. This must be done within fifteen (15) days from the date the delivery was made to you. Be sure to retain the container for inspection.

Bloomfield Industries cannot assume liability for damage or loss incurred in transit. We will, however, at your request, supply you with the necessary documents to support your claim.

Satellite Brewer

xi

Image 2
Contents For WithWarranty Statement Table of Contents SpecificationsFeatures and Operating Controls Features and Operating Controls Agency Approval Information General Information and PrecautionsBurn Hazard PLUMBER’S Installation Instructions Installation InstructionsInstall Legs Level the UnitElectric Shock Hazard Installation InstructionsELECTRICIAN’S Installation Instructions Initial SET-UP Instructions2 GAL Operating InstructionsBrewing Coffee HOT Water Faucet Operating InstructionsBrew & Bypass Procedure Clean Coffee Brewer Cleaning InstructionsElectric Shock Hazard Cleaning InstructionsProcedure Clean Satellite Temperature Adjustment Servicing InstructionsBrew Timer Adjustment Servicing InstructionsQuality Timer Adjustment Procedure Delime the Water Tank Chemical Burn HazardServicing Instructions Troubleshooting Suggestions Symptom Possible Cause Suggested RemedyTroubleshooting Suggestions Model 9311 Exploded View Model 9311 Parts List Wiring Diagram 9340 120 Satellite Exploded View & Parts ListModel Volts Watts Telephone Fax

9311 specifications

Bloomfield 9311 is a cutting-edge agricultural tool designed to elevate efficiency and productivity in modern farming practices. This innovative machine is engineered to cater to a variety of agricultural needs, focusing on precision farming, sustainability, and versatility.

One of the standout features of the Bloomfield 9311 is its advanced precision agriculture capabilities. Equipped with state-of-the-art GPS technology, this machine allows for precise field mapping, enabling farmers to identify optimal planting, irrigation, and harvesting strategies. This level of precision not only maximizes yield but also minimizes unnecessary resource use, contributing to sustainable farming practices.

The Bloomfield 9311 is powered by a robust, fuel-efficient engine that ensures reliability and performance in the field. This engine technology is coupled with an advanced transmission system that enhances speed and control, making it suitable for various terrains and crop types. The machine is designed to handle changes in field conditions seamlessly, ensuring that farmers can operate efficiently regardless of weather or soil variability.

An essential characteristic of the Bloomfield 9311 is its modular design, allowing for easy customization and upgradeability. Farmers can equip the machine with different attachments based on their specific operational needs, whether it’s plowing, seeding, or harvesting. This flexibility means that the investment in the Bloomfield 9311 can adapt to changing agricultural practices or crop types over time.

In terms of technology, the Bloomfield 9311 integrates data analytics tools that provide real-time feedback and insights. This feature allows farmers to monitor the machine's performance and track field conditions, leading to informed decision-making. Additionally, the machine is designed to be user-friendly, with intuitive controls and an ergonomic cab that enhances operator comfort and productivity.

Moreover, Bloomfield's commitment to environmental sustainability is reflected in the design of the 9311. With reduced emissions and enhanced fuel efficiency, the machine aligns with the growing emphasis on eco-friendly farming solutions. By investing in the Bloomfield 9311, farmers not only benefit from improved operational efficiency but also contribute to a more sustainable agricultural future.

In conclusion, the Bloomfield 9311 stands out as a revolutionary tool in the agricultural sector. With its precision farming capabilities, adaptable design, advanced engineering, and commitment to sustainability, it is poised to become a staple in modern farming operations, empowering farmers to meet the demands of an ever-changing agricultural landscape.