Bloomfield 9311 owner manual Servicing Instructions

Page 17

SERVICING INSTRUCTIONS (continued)

661 74415 9311 Single Satellite Brewer

10.Reinstall tank lid assembly into hot water tank. Make sure the lid gasket is properly in place, then reinstall the hold- down clamps.

11.Remove spray disks and gaskets. Rinse both brew heads with clean water. Using a stiff brush, scrub spray disk to remove any lime or calcium build-up. Reinstall gaskets and spray disks.

13.Reconnect brewer to electrical supply .

14.Install the brew chamber without filter paper or grounds.

15.Place an empty satellite under the brew chamber. Run at least five 1-1/2 gallon brew cycles and discard all water generated at the end of each cycle.

Repeat for the other side.

16.Rinse satellite with clean water. Reinstall one empty satellite under each brew chamber.

Brewer is ready to use.

NOTE: Normally, silicone hoses do not need to be delimed. Should deliming hoses become necessary, Bloomfield recommends replacing the hoses.

Image 17

Contents With ForWarranty Statement Specifications Table of ContentsFeatures and Operating Controls Features and Operating Controls Agency Approval Information General Information and PrecautionsBurn Hazard Install Legs Installation InstructionsPLUMBER’S Installation Instructions Level the UnitELECTRICIAN’S Installation Instructions Installation InstructionsElectric Shock Hazard Initial SET-UP Instructions2 GAL Operating InstructionsBrewing Coffee HOT Water Faucet Operating InstructionsBrew & Bypass Cleaning Instructions Procedure Clean Coffee BrewerElectric Shock Hazard Cleaning InstructionsProcedure Clean Satellite Servicing Instructions Temperature AdjustmentServicing Instructions Brew Timer AdjustmentQuality Timer Adjustment Chemical Burn Hazard Procedure Delime the Water TankServicing Instructions Symptom Possible Cause Suggested Remedy Troubleshooting SuggestionsTroubleshooting Suggestions Model 9311 Exploded View Model 9311 Parts List Wiring Diagram 9340 120 Satellite Exploded View & Parts ListModel Volts Watts Telephone Fax

9311 specifications

Bloomfield 9311 is a cutting-edge agricultural tool designed to elevate efficiency and productivity in modern farming practices. This innovative machine is engineered to cater to a variety of agricultural needs, focusing on precision farming, sustainability, and versatility.

One of the standout features of the Bloomfield 9311 is its advanced precision agriculture capabilities. Equipped with state-of-the-art GPS technology, this machine allows for precise field mapping, enabling farmers to identify optimal planting, irrigation, and harvesting strategies. This level of precision not only maximizes yield but also minimizes unnecessary resource use, contributing to sustainable farming practices.

The Bloomfield 9311 is powered by a robust, fuel-efficient engine that ensures reliability and performance in the field. This engine technology is coupled with an advanced transmission system that enhances speed and control, making it suitable for various terrains and crop types. The machine is designed to handle changes in field conditions seamlessly, ensuring that farmers can operate efficiently regardless of weather or soil variability.

An essential characteristic of the Bloomfield 9311 is its modular design, allowing for easy customization and upgradeability. Farmers can equip the machine with different attachments based on their specific operational needs, whether it’s plowing, seeding, or harvesting. This flexibility means that the investment in the Bloomfield 9311 can adapt to changing agricultural practices or crop types over time.

In terms of technology, the Bloomfield 9311 integrates data analytics tools that provide real-time feedback and insights. This feature allows farmers to monitor the machine's performance and track field conditions, leading to informed decision-making. Additionally, the machine is designed to be user-friendly, with intuitive controls and an ergonomic cab that enhances operator comfort and productivity.

Moreover, Bloomfield's commitment to environmental sustainability is reflected in the design of the 9311. With reduced emissions and enhanced fuel efficiency, the machine aligns with the growing emphasis on eco-friendly farming solutions. By investing in the Bloomfield 9311, farmers not only benefit from improved operational efficiency but also contribute to a more sustainable agricultural future.

In conclusion, the Bloomfield 9311 stands out as a revolutionary tool in the agricultural sector. With its precision farming capabilities, adaptable design, advanced engineering, and commitment to sustainability, it is poised to become a staple in modern farming operations, empowering farmers to meet the demands of an ever-changing agricultural landscape.