Bloomfield 0420 owner manual Operation, Program Brew Volumes

Page 10

OPERATION (continued)

B. PROGRAM BREW VOLUMES

♦Each BREW VOLUME SELECT KEY is individually

programmable.

 

♦ Keys may be programmed for pulse brewing to optimize

 

contact times and extraction rates, or to minimize overflowing

 

the brew chamber when using large amounts of grounds.

 

♦ Up to 10 pulses may be programmed. Each pulse delay is

 

fixed at 15 seconds.

1.

Place an empty airpot under the brew head. Install the brew

 

chamber (without filter) under the brew head

2.

Press and hold BREW key until beep sounds and the indicator

 

lights flash.

3.

Press and release the VOLUME SELECT KEY to be programmed.

Fig. 5 Program Volumes

Water will begin to flow into the airpot. When the desired water

level is reached, press the key again to stop the water flow.

 

For pulse brew:

a.Press the key to start the water flow.

b.Press the key again to stop the flow after the time desired for the first pulse.

c.Press the key again to resume water flow.

d.Repeat until desired total delivered volume is reached.

NOTE: Water flow can be stopped and restarted up to 10 times per brew. The delay between pulses is fixed at 15 seconds.

4.Press the BREW KEY to enter these settings into memory and resume normal operation.

5.Run a normal brew with filter and grounds to verify settings.

Repeat steps 1 through 4 to program the other VOLUME SELECT KEY, or to revise existing settings.

8

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 686 Warranty Statement Specifications Table of ContentsApplicability Features and Operating Controls Automatic Brewers Electrical Damage Precautions and General InformationAgency Listing Information Burn HazardLeveling the Unit InstallationUnstable Equipment Hazard Installation PLUMBER’S Installation InstructionsELECTRICIAN’S Installation Instructions Shock HazardOperation START-UPProgram Brew Volumes OperationPreparation Operation Brewing CoffeePrepare for Next Brew Cleaning Instructions Procedure Clean Coffee BrewerTroubleshooting Suggestions Symptom Possible Cause Suggested RemedyAccess Panels Servicing InstructionsTemperature Adjustment Servicing InstructionsReplace Thermostat Cotherm Remove Tank LID AssemblyReplace Heating Element Clean Solenoid Screen Replace SolenoidReplace Controller Procedure Delime the Water Tank Chemical Burn HazardExploded View & Parts List Cabinet & Electrical ComponentsPlumbing Components Service Parts Kits Wiring Diagram Telephone Fax

0420 specifications

Bloomfield 0420 is a cutting-edge technology that has gained considerable attention in various sectors, including telecommunications, smart cities, and environmental monitoring. Positioned as a versatile platform, it offers robust features designed to enhance connectivity and facilitate data-driven decision-making.

One of the main features of Bloomfield 0420 is its advanced communication protocol. This protocol ensures seamless integration with various devices, making it an ideal choice for IoT (Internet of Things) applications. With its capability to support low-power wide-area networks (LPWAN), Bloomfield 0420 allows for long-range communication while minimizing energy consumption. This is especially beneficial for devices deployed in remote or hard-to-reach locations, where battery life is critical.

In addition, Bloomfield 0420 utilizes state-of-the-art sensor technologies to gather real-time data across diverse environments. This includes environmental sensors, which can monitor air quality, temperature, humidity, and other vital parameters. The data collected is not only used for monitoring purposes but can also trigger automated responses, allowing for timely interventions and improving overall efficiency.

Another hallmark of Bloomfield 0420 is its adaptability. The platform is engineered to support various applications, ranging from smart agriculture to urban infrastructure. For instance, in agriculture, it can optimize irrigation systems by analyzing soil moisture levels and weather patterns. In urban settings, it can assist in traffic management and public safety by providing insights into crowd density and movement.

Security is paramount in the design of Bloomfield 0420. The technology incorporates advanced encryption methodologies and secure communication channels to protect sensitive data. This ensures that information transmitted between devices and data centers remains confidential and secure from potential cyber threats.

In conclusion, Bloomfield 0420 represents a significant advancement in the technology landscape, combining robust communication capabilities, intelligent data collection, adaptability across sectors, and strong security measures. Its innovative approach is set to empower industries to harness the full potential of data, drive efficiency, and foster sustainable practices, positioning it as a key player in the future of technology and connectivity. As more sectors look to integrate such technology, Bloomfield 0420 is poised to play a critical role in shaping the smart ecosystems of tomorrow.
Top Page Image Contents