Bloomfield 0420 owner manual Operation, Start-Up

Page 9

OPERATION

Fig. 4 Water Flow Diagram

A.START-UP

For initial start-up, or if the brewer has not been used for an extended period of time:

♦Be sure spray disk and brew gasket are properly installed in the brew head.

♦Be sure the water supply is properly connected and the water supply valve is turned ON and that TANK HEATER SWITCH is OFF before connecting brewer to electric power.

♦Be sure the WATER TANK IS FILLED.

IMPORTANT: Fill the water tank before energizing this brewer.

1.Connect brewer to electric power. Brewer will begin filling. When solenoid closes, tank is full.

2.Place an empty container in the hot water well. Press the HOT WATER DISPENSER BUTTON and dispense one cup of water. Tank should refill. Discard water.

3.Press TANK HEATER SWITCH to ON.

4.When READY light glows, brewer is ready to use.

IMPORTANT:

TANK MUST BE FULL OF WATER BEFORE CONNECTING BREWER TO ELECTRIC POWER.

Heating elements will be damaged if allowed to operate without being fully submerged in water. Damage caused by operating the brewer without water in the tank is NOT COVERED BY WARRANTY.

See page 8 for setting delivered water volumes for VOLUME SELECTION KEYS.

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 686 Warranty Statement Table of Contents SpecificationsApplicability Features and Operating Controls Automatic Brewers Agency Listing Information Precautions and General InformationElectrical Damage Burn HazardInstallation Leveling the UnitUnstable Equipment Hazard PLUMBER’S Installation Instructions InstallationShock Hazard ELECTRICIAN’S Installation InstructionsSTART-UP OperationOperation Program Brew VolumesOperation Brewing Coffee PreparationPrepare for Next Brew Procedure Clean Coffee Brewer Cleaning InstructionsSymptom Possible Cause Suggested Remedy Troubleshooting SuggestionsServicing Instructions Access PanelsServicing Instructions Temperature AdjustmentRemove Tank LID Assembly Replace Thermostat CothermReplace Heating Element Replace Solenoid Clean Solenoid ScreenReplace Controller Chemical Burn Hazard Procedure Delime the Water TankCabinet & Electrical Components Exploded View & Parts ListPlumbing Components Service Parts Kits Wiring Diagram Telephone Fax

0420 specifications

Bloomfield 0420 is a cutting-edge technology that has gained considerable attention in various sectors, including telecommunications, smart cities, and environmental monitoring. Positioned as a versatile platform, it offers robust features designed to enhance connectivity and facilitate data-driven decision-making.

One of the main features of Bloomfield 0420 is its advanced communication protocol. This protocol ensures seamless integration with various devices, making it an ideal choice for IoT (Internet of Things) applications. With its capability to support low-power wide-area networks (LPWAN), Bloomfield 0420 allows for long-range communication while minimizing energy consumption. This is especially beneficial for devices deployed in remote or hard-to-reach locations, where battery life is critical.

In addition, Bloomfield 0420 utilizes state-of-the-art sensor technologies to gather real-time data across diverse environments. This includes environmental sensors, which can monitor air quality, temperature, humidity, and other vital parameters. The data collected is not only used for monitoring purposes but can also trigger automated responses, allowing for timely interventions and improving overall efficiency.

Another hallmark of Bloomfield 0420 is its adaptability. The platform is engineered to support various applications, ranging from smart agriculture to urban infrastructure. For instance, in agriculture, it can optimize irrigation systems by analyzing soil moisture levels and weather patterns. In urban settings, it can assist in traffic management and public safety by providing insights into crowd density and movement.

Security is paramount in the design of Bloomfield 0420. The technology incorporates advanced encryption methodologies and secure communication channels to protect sensitive data. This ensures that information transmitted between devices and data centers remains confidential and secure from potential cyber threats.

In conclusion, Bloomfield 0420 represents a significant advancement in the technology landscape, combining robust communication capabilities, intelligent data collection, adaptability across sectors, and strong security measures. Its innovative approach is set to empower industries to harness the full potential of data, drive efficiency, and foster sustainable practices, positioning it as a key player in the future of technology and connectivity. As more sectors look to integrate such technology, Bloomfield 0420 is poised to play a critical role in shaping the smart ecosystems of tomorrow.
Top Page Image Contents