Bloomfield 0420 owner manual Shock Hazard, ELECTRICIAN’S Installation Instructions

Page 8

INSTALLATION (continued)

WARNING:

SHOCK HAZARD

Brewer must be properly grounded to prevent possible shock hazard. DO NOT assume a plumbing line will provide such a ground. Electrical shock will cause death or serious injury.

IMPORTANT:

Supply power must match nameplate for voltage and phase. Connecting to the wrong voltage will damage the brewer or result in decreased performance. Such damage is not covered by warranty.

IMPORTANT:

Do not connect brewer to electrical power until you are ready to fill the tank. See instructions on page 7.

IMPORTANT:

The ground prong of the plug is part of a system designed to protect you from electrical shock in the event of internal damage. Never cut off the ground prong nor twist a blade to fit an existing receptacle. Contact a licensed electrician to install the proper circuit and receptacle.

GROUND

PIN

ELECTRICIAN’S INSTALLATION INSTRUCTIONS

REFER TO ELECTRICAL SPECIFICATIONS - Page 1 Check the nameplate to determine correct electrical service required for the Brewer to be installed.

IMPORTANT: Before connecting to electricity, make sure brewer is connected to the water supply.

All models are equipped with a cord and plug. They require a 115 - 125 volt 20 amp circuit (50/60 Hz, 2 wire plus ground, with NEMA 5-15R or 5-20R Receptacle).

See Figure 3 at right.

NEMA 5-15P

NEMA 5-15R

PLUG

RECEPTACLE

Fig. 3 Power Supply Plug

6

Image 8
Contents 686 Warranty Statement Applicability Table of ContentsSpecifications Features and Operating Controls Automatic Brewers Precautions and General Information Agency Listing InformationElectrical Damage Burn HazardUnstable Equipment Hazard InstallationLeveling the Unit Installation PLUMBER’S Installation InstructionsELECTRICIAN’S Installation Instructions Shock HazardOperation START-UPProgram Brew Volumes OperationPrepare for Next Brew Operation Brewing CoffeePreparation Cleaning Instructions Procedure Clean Coffee BrewerTroubleshooting Suggestions Symptom Possible Cause Suggested RemedyAccess Panels Servicing InstructionsTemperature Adjustment Servicing InstructionsReplace Heating Element Remove Tank LID AssemblyReplace Thermostat Cotherm Clean Solenoid Screen Replace SolenoidReplace Controller Procedure Delime the Water Tank Chemical Burn HazardExploded View & Parts List Cabinet & Electrical ComponentsPlumbing Components Service Parts Kits Wiring Diagram Telephone Fax

0420 specifications

Bloomfield 0420 is a cutting-edge technology that has gained considerable attention in various sectors, including telecommunications, smart cities, and environmental monitoring. Positioned as a versatile platform, it offers robust features designed to enhance connectivity and facilitate data-driven decision-making.

One of the main features of Bloomfield 0420 is its advanced communication protocol. This protocol ensures seamless integration with various devices, making it an ideal choice for IoT (Internet of Things) applications. With its capability to support low-power wide-area networks (LPWAN), Bloomfield 0420 allows for long-range communication while minimizing energy consumption. This is especially beneficial for devices deployed in remote or hard-to-reach locations, where battery life is critical.

In addition, Bloomfield 0420 utilizes state-of-the-art sensor technologies to gather real-time data across diverse environments. This includes environmental sensors, which can monitor air quality, temperature, humidity, and other vital parameters. The data collected is not only used for monitoring purposes but can also trigger automated responses, allowing for timely interventions and improving overall efficiency.

Another hallmark of Bloomfield 0420 is its adaptability. The platform is engineered to support various applications, ranging from smart agriculture to urban infrastructure. For instance, in agriculture, it can optimize irrigation systems by analyzing soil moisture levels and weather patterns. In urban settings, it can assist in traffic management and public safety by providing insights into crowd density and movement.

Security is paramount in the design of Bloomfield 0420. The technology incorporates advanced encryption methodologies and secure communication channels to protect sensitive data. This ensures that information transmitted between devices and data centers remains confidential and secure from potential cyber threats.

In conclusion, Bloomfield 0420 represents a significant advancement in the technology landscape, combining robust communication capabilities, intelligent data collection, adaptability across sectors, and strong security measures. Its innovative approach is set to empower industries to harness the full potential of data, drive efficiency, and foster sustainable practices, positioning it as a key player in the future of technology and connectivity. As more sectors look to integrate such technology, Bloomfield 0420 is poised to play a critical role in shaping the smart ecosystems of tomorrow.