Bloomfield 0420 owner manual Warranty Statement

Page 2

WARRANTY STATEMENT

All electrical equipment manufactured by BLOOMFIELD INDUSTRIES is warranted against defects in materials and workmanship for a period of one year from the date of original installation or eighteen (18) months from the date of shipment from our factory, whichever comes first, and is for the benefit of the original purchaser, except that:

a.airpots carry a 30 day parts warranty only.

b.dispensers; i.e., tea and coffee carry a 90 days parts warranty only, excludes decanters.

THE FOREGOING OBLIGATION IS EXPRESSLY GIVEN IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY EXCLUDED.

BLOOMFIELD INDUSTRIES DIVISION / SPECIALTY EQUIPMENT MANUFACTURING CORPORATION SHALL NOT BE LIABLE FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES FROM ANY CAUSE WHATSOEVER.

This warranty is void if it is determined that upon inspection by an Authorized Service Agency that the equipment has been modified, misused, misapplied, improperly installed, or damaged in transit or by fire, flood or act of God.

It also does not apply if the serial nameplate has been removed or unauthorized service personnel perform service. The prices charged by Bloomfield Industries for its products are based upon the limitations in this warranty. Seller’s obligation under this warranty is limited to the repair of defects without charge by a Bloomfield Industries Authorized Service Agency or one of its sub-agencies. This service will be provided on customer’s premises for non-portable models. Portable models (a device with a cord and plug) must be taken or shipped to the closest Authorized Service Agency, transportation charges prepaid, for services.

In addition to restrictions contained in this warranty, specific limitations are shown below (Additional Warranty Exclusions). Bloomfield Industries Authorized Service Agencies are located in principal cities.

This warranty is valid in the United States and void elsewhere. Please consult your classified telephone directory or your food service equipment dealer; or, for information and other details concerning warranty, write to:

Service Parts Department

Bloomfield Industries

P.O. Box 280

Verdi, NV 89439

 

Phone: (775) 689-5700

Fax: (888) 492-2783

SERVICE POLICY AND PROCEDURE GUIDE ADDITIONAL WARRANTY EXCLUSIONS

1.Resetting of safety thermostats, circuit breakers, overload protectors, or fuse replacements unless warranted conditions are the cause.

2.All problems due to operation at voltages other than specified on equipment nameplates; conversion to correct voltage must be the customer’s responsibility.

3.All problems due to electrical connections not made in accordance with electrical code requirements and wiring diagrams supplied with the equipment.

4.Replacement of items subject to normal wear, to include such items as knobs and light bulbs. Normal maintenance functions including adjustment of thermostats, microswitches, and replacement of fuses and indicating lights are not covered under warranty.

5.All problems due to inadequate water supply, such as fluctuating, or high or low water pressure.

6.All problems due to mineral/calcium deposits, or contamination from chlorides/chlorines. De-liming is considered a preventative maintenance function and is not covered by warranty.

7.Full use, care and maintenance instructions are supplied with each machine. Those miscellaneous adjustments noted are customer responsibility. Proper attention will prolong the life of the machine.

8.Travel mileage is limited to sixty (60) miles from an authorized Service Agency or one of its sub-agencies.

9.All labor shall be performed during normal working hours. Overtime premium shall be charged to the customer.

10.All genuine Bloomfield replacement parts are warranted for ninety (90) days from date of purchase on non- warranted equipment. Any use of non-genuine Bloomfield parts completely voids any warranty.

11.Installation, labor and job check-out are not considered warranty.

12.Charges incurred by delays, waiting time or operating restrictions that hinder the service technicians ability to perform services are not covered by warranty. This includes institutional and correctional facilities.

SHIPPING DAMAGE CLAIMS PROCEDURE

NOTE: For your protection, please note that equipment in this shipment was carefully inspected and packaged by skilled personnel before leaving the factory.

Upon acceptance of this shipment, the transportation company assumes full responsibility for its safe delivery.

IF SHIPMENT ARRIVES DAMAGED:

1.VISIBLE LOSS OR DAMAGE: Be certain that any visible loss or damage is noted on the freight bill or express receipt, and that the note of loss or damage is signed by the delivery person.

2.FILE CLAIM FOR DAMAGE IMMEDIATELY: Regardless of the extent of the damage.

3.CONCEALED LOSS OR DAMAGE: if damage is unnoticed until the merchandise is unpacked, notify the transportation company or carrier immediately, and file “CONCEALED DAMAGE” claim with them. This must be done within fifteen (15) days from the date the delivery was made to you. Be sure to retain the container for inspection.

Bloomfield Industries cannot assume liability for damage or loss incurred in transit. We will, however, at your request, supply you with the necessary documents to support your claim.

xixi

Image 2
Contents 686 Warranty Statement Applicability Table of ContentsSpecifications Features and Operating Controls Automatic Brewers Electrical Damage Precautions and General InformationAgency Listing Information Burn HazardUnstable Equipment Hazard InstallationLeveling the Unit Installation PLUMBER’S Installation InstructionsELECTRICIAN’S Installation Instructions Shock HazardOperation START-UPProgram Brew Volumes OperationPrepare for Next Brew Operation Brewing CoffeePreparation Cleaning Instructions Procedure Clean Coffee BrewerTroubleshooting Suggestions Symptom Possible Cause Suggested RemedyAccess Panels Servicing InstructionsTemperature Adjustment Servicing InstructionsReplace Heating Element Remove Tank LID AssemblyReplace Thermostat Cotherm Clean Solenoid Screen Replace SolenoidReplace Controller Procedure Delime the Water Tank Chemical Burn HazardExploded View & Parts List Cabinet & Electrical ComponentsPlumbing Components Service Parts Kits Wiring Diagram Telephone Fax

0420 specifications

Bloomfield 0420 is a cutting-edge technology that has gained considerable attention in various sectors, including telecommunications, smart cities, and environmental monitoring. Positioned as a versatile platform, it offers robust features designed to enhance connectivity and facilitate data-driven decision-making.

One of the main features of Bloomfield 0420 is its advanced communication protocol. This protocol ensures seamless integration with various devices, making it an ideal choice for IoT (Internet of Things) applications. With its capability to support low-power wide-area networks (LPWAN), Bloomfield 0420 allows for long-range communication while minimizing energy consumption. This is especially beneficial for devices deployed in remote or hard-to-reach locations, where battery life is critical.

In addition, Bloomfield 0420 utilizes state-of-the-art sensor technologies to gather real-time data across diverse environments. This includes environmental sensors, which can monitor air quality, temperature, humidity, and other vital parameters. The data collected is not only used for monitoring purposes but can also trigger automated responses, allowing for timely interventions and improving overall efficiency.

Another hallmark of Bloomfield 0420 is its adaptability. The platform is engineered to support various applications, ranging from smart agriculture to urban infrastructure. For instance, in agriculture, it can optimize irrigation systems by analyzing soil moisture levels and weather patterns. In urban settings, it can assist in traffic management and public safety by providing insights into crowd density and movement.

Security is paramount in the design of Bloomfield 0420. The technology incorporates advanced encryption methodologies and secure communication channels to protect sensitive data. This ensures that information transmitted between devices and data centers remains confidential and secure from potential cyber threats.

In conclusion, Bloomfield 0420 represents a significant advancement in the technology landscape, combining robust communication capabilities, intelligent data collection, adaptability across sectors, and strong security measures. Its innovative approach is set to empower industries to harness the full potential of data, drive efficiency, and foster sustainable practices, positioning it as a key player in the future of technology and connectivity. As more sectors look to integrate such technology, Bloomfield 0420 is poised to play a critical role in shaping the smart ecosystems of tomorrow.