20Care and cleaning
Before you change the oven lamp:
•Deactivate the appliance.
•Remove the fuses from the fuse box or deactivate the circuit breaker.
CAUTION!
Put a cloth on the bottom of the interior of the appliance. It prevents damage to the lamp glass cover and the cavity.
Replacing the oven lamp:
1.You can find the lamp glass cover at the back of the cavity. Turn the lamp glass cover counterclockwise to remove it.
2.Clean the glass cover.
3.If necessary, replace the oven lamp with applicable 300°C
Use the same oven lamp type.
4. Install the glass cover.
Oven Ceiling
You can fold down the heating element on the oven ceiling to clean the oven ceiling easily.
WARNING!
Before you fold down the heating element deactivate the appliance. Make sure that the appliance is cold. There is a risk of burns!
Folding down the heating element
1.Remove the shelf support.
2.Hold the heating element with the two
hands at the front
3. Pull it forwards against the spring pres- sure and out along the support on both sides.
4. The heating element folds down. The oven ceiling is ready to clean.
Installing the heating element
1.Install the heating element in opposite se- quence.
Install the heating element correctly on the two sides above the support on the inner wall of the appliance.
2. Install shelf support.
Oven door and glass panels
To clean the oven door remove it.
CAUTION!
Be careful when you remove the door from the appliance. The door is heavy!