THE DUAL GRILL
CAUTION - ACCESSIBLE PARTS MAY BECOME HOT WHEN THE GRILL IS IN USE. CHILDREN SHOULD BE KEPT AWAY.
The grill is a dual circuit grill which means that the full area of the grill can be used or for economy purposes, the centre section only can be used when cooking smaller quantities of food.
USING THE GRILL
1.To operate the grill pop out and turn the grill control clockwise for full grill or anticlockwise for centre section only.
2.The highest number represents the hottest setting and the lowest the coolest setting.
3.Ensure the second oven control is in the OFF position '0'.
THE GRILL DOOR MUST BE LEFT
OPEN DURING GRILLING. IF CLOSED THE ELEMENTS WILL SWITCH ON AND OFF AND THE OVEN LIGHT WILL TURN ON AND OFF AS A WARNING.
THINGS TO NOTE
The cooling fan for the controls will operate in conjunction with the grill. For more information on the operation of the cooling fan see page 4.
The grill indicator neon will glow until the desired power level has been reached. It will turn ON and OFF periodically during cooking showing that the temperature is being maintained.
The outer element may appear to glow slightly brighter than the inner element. This is quite
lnormal.
Some smoke from fat splashes may be evident as the grill cleans itself.
USING THE TELESCOPIC RUNNERS
(where fitted)
1.Ensure the telescopic runners are pushed back into the oven cavity before fitting the shelf.
2.Holding the front edge of the shelf with both hands, place the rear shelf forms over the telescopic runners.
3.Slide the shelf into position, lifting slightly at the front so that the shelf locates into the retaining hooks.
To remove, raise the front edge and withdraw the shelf.
RETAINING
HOOK
Ensure the shelf is positively located before using.
Note
Should you wish to purchase a telescopic runner kit, this can be ordered from your local Service Force Centre by quoting part number (BAZ D02).
11