AEG D4100-1 manual Preparing Cabinet for Fitting of Oven, Do not lift the appliance by the handles

Page 41

THINGS TO NOTE

This appliance is designed to be fitted in cabinets of the recommended dimensions as shown (Fig. 3), page 41.

If your cabinet interior dimension is between 565-570mm the oven may still be fitted. However, a minor modification to the cabinet will be required.

The dimensions given provide adequate air circulation around the unit within the cabinet, ensuring compliance with BS EN60-335.

Enquiries regarding the installation of the appliance point if required should be made to your Regional Electricity Company to ensure compliance with their regulations.

The appliance socket switch should be outside the cabinet but within 2m of the appliance to make it accessible to switch off the appliance in case of an emergency.

To protect the hands wear gloves when lifting the oven into its housing.

Do not lift the appliance by the handles.

NOTE: HOUSE CIRCUIT

Earth leakage and continuity tests must be carried out before the appliance is connected to the mains supply and re-checked after fitting.

PREPARING CABINET FOR FITTING OF OVEN

Make sure the cabinet is the correct size for the appliance to be fitted (Ref. Fig. 3), page 41.

If the size is between 565-570mm, then the cabinet should be modified so that at the screw fixing points the recommended dimension of at least 560-565mm is maintained. The modification should ideally be localised to ensure that after screw fitment the oven is securely fixed into position.

The cabinet must be stable and level by firmly securing it to the wall or floor. If necessary, make arrangements to ensure the shelf upon which the oven will rest is level.

When the appliance is installed ensure a minimum gap of 2mm is maintained between the trim on the bottom edge of the appliance and any corresponding door/ panel underneath.

40

Image 41
Contents Competence D4100-1 Important Safety Information Contents Page Control Panel Getting to Know Your OvenGrill and Oven Furniture Before Using the Oven for the First Time SET the Time of DAY Electronic TimerHOW to SET the Countdown To SET the Timer to Switch on and OFF Automatically To Cancel the CountdownSetting the Oven Timer Control To Return the Appliance to Manual To SET the Timer to Switch OFF onlyTo Cancel AN Automatic Programme Automatic Cooking L6. Things to NoteDual Grill Using the GrillUsing the Telescopic Runners Hints and Tips Grill PAN and HandleFood Grill Time Grilling ChartTo FIT the Second Oven Shelf Using the Second OvenSecond Oven Hints and Tips Food Second Oven Cooking ChartMain FAN Oven Using the Telescopic Runners Conventional Oven Using the Conventional OvenHints and Tips FAN Oven Conventional Oven Cooking ChartRoasting Chart Roasting ChartInternal Temperatures Meat SECOND/FAN Cooking Time OvenPizza Function Using Pizza FunctionCooking Times Using SpeedcookSpeedcook Thermal Grilling Using Thermal GrillingFood Shelf Temp Thermal Grilling ChartDefrosting Using Defrost FeaturePage Meat Temperatures Helpful Hints When Buying and Preparing FoodCleaning Materials Care and CleaningCleaning the Outside of the Oven Removing and Replacing Wirework Side RunnersCleaning the Door Glass Cleaning Inside the OvensCare of Stayclean Surfaces To Replace the Inner Glass Panel To Clean the Inner Glass Door PanelsTo Remove the Inner Glass Replacing AN Oven Light Bulb Cleaning the Grill and Oven FurnitureIf Something Doesnt Work ProblemOven light fails to illuminate Customer Care Department Service and Spare PartsAEG SL1 1DZStandard guarantee conditions Guarantee ConditionsTechnical Details Installation InstructionsChoice of Electrical Connection Do not lift the appliance by the handles Preparing Cabinet for Fitting of OvenCross section Tools Required HOW to Finish UnpackingMaking the Electrical Connections Preparing CableTo Remove Cover of Mains Terminal Checking Electrical Connections Connecting to Mains TerminalConnecting to a HOB or Appliance Point Fitting Into the Cabinet T E S AEG Domestic Appliances