AEG 75248 GA1 manual Control Panel, Temperature setting buttons

Page 13

Description of the appliance

Control Panel

1ON/OFF button

2Temperature setting button (for warmer temperatures)

3Temperature display

4Temperature setting button (for colder temperatures)

5FROSTMATIC indicator light (yellow)

6FROSTMATIC button

7WARNING indicator light (red)

8ALARM OFF button (see "Control and Information Systems")

Temperature setting buttons

The temperature is adjusted using the „+“ (WARMER) and „-“ (COLDER) buttons.

These buttons are connected to the temperature display.

•The temperature display is switched over from the display of the ACTUAL temperature (Temperature display is illuminated) to the dis- play of the DESIRED temperature (Temperature display flashes) by pressing one of the two buttons, „+“ (WARMER) or „-“ (COLDER).

•Each time one of the two buttons is pressed again the DESIRED tem- perature is adjusted by 1 °C.

•If neither button is pressed, the temperature display automatically switches back after a short period (approx. 5 sec.) to the display of the ACTUAL temperature. The ACTUAL temperature in the appliance is now adjusted to match the preset DESIRED temperature.

DESIRED temperature means:

The temperature that is required in the appliance, this can be adjusted to the temperatures shown in the display. The DESIRED temperature is indicated by flashing numbers.

ACTUAL temperature means:

The temperature display indicates the temperature that is currently present in the appliance. The ACTUAL temperature is indicated with illuminated numbers.

3 Once the FROSTMATIC function has been switched on the DESIRED temperature that was set originally cannot be changed.

818 35 95-01/9

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Arctis 75248 GA Dear customer Contents Maximum Load Hints and Tips What to do ifPrior to Installation Important Safety InstructionsInstallation RefrigerantMaintenance and Cleaning Child SafetyDuring Use ServicingAppliance Transport Environmental InformationPackaging material Old applianceInstallation Location InstallationBefore Use PackagingAppliance Alignment Freezer needs ventilationElectrical Connection No-frost frost free system Opening the doorView of the appliance Description of the applianceCold accumulation block Control Panel Temperature setting buttonsAlarm OFF button Temperature displayFROSTMATIC-button Initial use Prior to Initial Start-UpTemperature Adjustment Switching the Appliance Off Control and Information Systems Temperature WarningOpen Door Warning Function Errors Temperature memoryFreezing Preparation of Ice Cubes Frozen StorageTips Maximum Load Storage Goods Symbols/Freezing CalendarHints and Tips Energy Saving AdviceNormal Operating Sounds Food StorageInternal Cleaning Maintenance and CleaningExternal Cleaning Correcting Malfunctions What to do ifWhat to do if Replacing the light bulb Regulations, Standards, GuidelinesRefrigerant Circuit Technical TerminologyEvaporator CompressorStandard Guarantee Conditions Guarantee Conditions818 35 95-01/9 08705 929 Service & Spare PartsCustomer Care Subject to change without notice
Top Page Image Contents