Before Use
Packaging
01. Remove all adhesive tape and packaging from the interior of the appli- ance.
3 Any remnants of adhesive can be removed with white spirit.
2.Remove the transport protection pieces and pull off the adhesive tape.
3.Wash the inside of the appliance with lukewarm water with a little bicarbonate of soda added (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry the appliance thoroughly.
Installation
The position of the freezer part and the fridge part in the combination
Installation Location
The appliance should be installed in a well ventilated, dry room.
Energy use and efficient performance of the appliance is affected by the ambient temperature.
The appliance should therefore
–not be exposed to direct sunlight;
–not be installed next to radiators, cookers or other sources of heat;
–only be installed at a location whose ambient temperature corresponds to the climate classification, for which the appliance is designed.
8 | 818 35 |