Cecilware WHIPPER Installation Instructions, III. Priming Instructions for ICAP1 Pourover

Page 4

START UP INSTRUCTIONS FOR ICAP1 POUROVER CAPPUCCINO DISPENSER – see ill. 3

I. INSTALLATION INSTRUCTIONS

This equipment is to be installed to comply with the applicable Federal, State, or local plumbing codes having jurisdiction. In addition:

1.A quick disconnect water connection or enough extra coiled tubing (at least 2x the depth of the unit) so that the machine can be moved for cleaning underneath.

2.An approved back flow prevention device, such as a double check valve to be installed between the machine and the wa- ter supply.

The ICAP1 POUROVER beverage dispenser is equipped with a 3/4” Water Inlet Valve (¼" to 3/4” adapter supplied with the unit) which is located on the right side in the back of the base (when looking at the machine from the front).

HIGHLY RECOMMENDED: A WATER SHUT-OFF VALVE and A WATER FILTER, preferably a combination Charcoal/Phosphate Filter, to remove odors and inhibit lime and scale build up in the machine.

Note: In areas with extremely hard water, a water softener must be installed in order to prevent a malfunctioning of the equip- ment and in order not to void the warranty.

After the machine has been unpacked and placed on a counter, pull out the drip tray and splash guard. It should contain the following: A Set of 4 Adjustable Leveling Legs & Water Inlet Fitting.

Connect the ¼" dia. copper waterline to the ¼" flare water inlet fitting of the valve.

Caution: Do not plug into power outlet yet. Make sure the Heater Switch is OFF (Toggle Down).

II.PRIMING - MANUAL/BOTTLE POUROVER (Toggle UP, Water Selection Switch, on the back panel) 1. Do NOT plug into power outlet yet.

2. Make sure Heater Switch is in the OFF position, located in back of machine.

3. Fill reservoir tank (top) with 2 gallons of water, wait about 3 minutes for water to fill Heating Tank below.

Refill Top Reservoir Tank with another 2 gallons of water. The unit will NOT dispense unless the Top Reservoir Tank is at least 1/2 full. So keep Reservoir Tank full.

Note: The unit has a Float (item 3, Ill. 8) inside the Reservoir Tank, which stops the machine from dispensing when the Reservoir Tank is low.

4. Plug into power outlet.

5. Turn Heater Switch ON.

6. Allow 10 to 15 minutes for water to reach dispense temperature of 190°F. Heater Indicator Light (red) goes ON when

heater is on (see lower front panel).

7.Fill hopper with product.

8.Place cup under dispenser.

9.Push and hold Dispense Button (green) until water flows from mixing chamber.

10.Machine is primed and ready to go.

III. PRIMING INSTRUCTIONS FOR ICAP1 POUROVER

PRIMING - AUTOFILL (Toggle Down,Water Selection Switch, on the back panel) 1. Plug into power outlet.

2. Turn Heater Switch ON.

3. Allow 10 to 15 minutes for water to reach dispense temperature of 190°F. Heater Indicator Light (red) goes ON when heater is on (see lower front panel).

4. Fill hopper with product.

5. Place cup under dispenser.

6. Push and hold Dispense Button (green) until water flow s from mixing chamber

7. Machine is primed and ready to go.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Cecilware sells value Worldwide Specifications ModelsInstallation Dispenser OperationFilling DispensingInstallation Instructions III. Priming Instructions for ICAP1 PouroverDrink Strength Adjustments To Increase or Decrease FLOW, Proceed AS FollowsDrink Strength Adjustments To Adjust Product Throw ILL #Cleaning Instructions Troubleshooting Procedure Trouble Probable Cause RemedyIllustration No Components Identification Description Side Panel% $ $& $% $$ $ % # $ % & ! ! ! !! ! !# !$ !% ICAP1 B LD Pourover with lit door $& $% $$ $# # $ % # !$ Icap Mini 1 B LD w/lit door & Mini Whipper B w/o lit door Automatic Icap 1 B LD LIT Door & Whipper B no LIT Door Manual Icap 1 B LD LIT Door Door Unit

ICAP-MINI, WHIPPER MINI, WHIPPER, ICAP1, ICAP1-P specifications

The Cecilware ICAP1-P and ICAP1 espresso machines are innovative coffee brewing equipment designed to meet the demands of both commercial and home environments. Known for their durability and efficiency, these machines are favored by coffee enthusiasts worldwide.

The ICAP1-P features a single group head system, which allows for precise brewing. With its powerful heating elements, the machine ensures that water is at the ideal temperature for extraction, enhancing the flavor of espresso shots. The ICAP1 also offers similar functionality but includes slightly different controls and specs catering to various user preferences. Both models are made from high-quality stainless steel, ensuring not only a sleek aesthetic but also longevity.

One of the most noteworthy features of the ICAP series is its user-friendly interface. The machines are equipped with easy-to-use pressure gauges, allowing operators to monitor the brewing process effectively. Additionally, these machines come with programmable shot timers, enabling users to achieve consistency with every cup.

The Whipper and Whipper Mini are versatile whipped cream dispensers that complement the espresso experience. The Whipper is known for its large capacity, making it perfect for busy cafes, while the Whipper Mini is ideal for smaller venues or home use. Both devices utilize advanced nitrous oxide technology to create and maintain the perfect whipped cream texture.

Whipper dispensers can maintain their whipped cream for extended periods, thanks to the sealed design that inhibits air exposure. The machines are made of durable, lightweight materials, allowing for easy handling and cleaning. The convenient one-handed operation makes serving quick and efficient, an essential aspect for fast-paced environments.

All these machines, including the ICAP-MINI variant, emphasize energy efficiency, a crucial factor for sustainable operations. The ICAP-MINI is a compact design that does not compromise on performance, making it suitable for locations with limited space. It still retains the same high-quality components seen in the larger models.

In conclusion, the Cecilware line, featuring models like the ICAP1-P, ICAP1, Whipper, Whipper Mini, and ICAP-MINI, stands out in the coffee equipment market for their reliability, user-friendly features, and advanced technology. These machines cater to a wide range of needs, from small coffee shops to high-volume establishments, ensuring that every cup of coffee is brewed to perfection.
Top Page Image Contents