Cecilware ICAP-MINI Drink Strength Adjustments, To Increase or Decrease FLOW, Proceed AS Follows

Page 5

IV. POUROVER-PORTABLE BOTTLE OPERATION (Toggle UP, Water Selection Switch, on the back panel)

UNIT CAN BE OPERATED WITH A 3 GALLONS CAPACITY FRESH WATER BOTTLE. TO OPERATE WITH PORTABLE BOTTLE, proceed AS FOLLOWS:

1.Remove Reservoir Tank Cover.

2.Make sure that Reservoir Tank is only 1/2 full or empty, to prevent water splillage. To remove excess water push dispense button.

3.Fill bottle with water .

4.Invert bottle into reservoir tank in one motion to minimize spillage.

5.Remove and refill bottle when “REFILL“ light is ON.

NOTE: REFILL LIGHT, ON THE FRONT DOOR PANEL, WILL GO ON, WHICH INDICATES THAT THE WATER TANK MUST BE REFILLED. WHEN REFILL LIGHT GOES ON, THE UNIT WILL NOT DISPENSE UNTIL TANK IS FILLED WITH WATER. REFILLING WITH HOT TAP WATER WILL SHORTEN HEAT UP TIME.

V. NORMAL OPERATION (POUROVER AND AUTOREFILL)

1.Place a 6 oz. or larger cup under dispense nozzle, then press and hold dispense switch (green) for 6 seconds.

The machine will dispense water at the rate of 1 oz. per second. Repeat it several times to check for con- sistent output.

2.While the tank is heating up, remove the hopper, load with product and reposition it back in the ma- chine.

When Heater Light goes OFF, the tank has reached its brew temperature and the machine is ready to begin dispensing the first cup of Cappuccino.

VI. WATER FLOW and

DRINK STRENGTH ADJUSTMENTS

THE UNIT IS FACTORY ADJUSTED TO DISPENSE WATER AND POWDER AT THE RATE OF 1.0 oz/ sec.

TO INCREASE OR DECREASE FLOW, PROCEED AS FOLLOWS:

1.Remove left side panel and locate Dispense Valve Flow Adjuster on top of Heated Tank.

2.Locate Flow Adjustment Screw (white) on Dispense Valve.

3.Rotate Adjustment Screw Counterclockwise to IN- CREASE flow rate.

4.Rotate Clockwise to DECREASE flow rate.

When making strength adjustments, do not adjust by more than 1/4 turn at a time, without checking drink strength (ratio of water to powder).

BOTTLE

RESERVOIR

COVER

RESERVOIR

TANK

WATER FLOW

 

ADJUSTMENT,

INDICATOR

SCREW ON

LIGHT- RED

DISPENSE

"REFILL TANK

VALVE

WHEN ON"

 

 

DISPENSE

 

BUTTON

HOT WATER TANK

 

 

DRIP TRAY

5Illustration No. 3 – ICAP 1 B LD POUROVER

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Cecilware sells value Worldwide Models SpecificationsDispenser Operation InstallationFilling DispensingIII. Priming Instructions for ICAP1 Pourover Installation InstructionsTo Increase or Decrease FLOW, Proceed AS Follows Drink Strength AdjustmentsTo Adjust Product Throw ILL # Drink Strength AdjustmentsCleaning Instructions Trouble Probable Cause Remedy Troubleshooting ProcedureIllustration No Side Panel Components Identification Description% $ $& $% $$ $ % # $ % & ! ! ! !! ! !# !$ !% ICAP1 B LD Pourover with lit door $& $% $$ $# # $ % # !$ Icap Mini 1 B LD w/lit door & Mini Whipper B w/o lit door Automatic Icap 1 B LD LIT Door & Whipper B no LIT Door Manual Icap 1 B LD LIT Door Door Unit

ICAP-MINI, WHIPPER MINI, WHIPPER, ICAP1, ICAP1-P specifications

The Cecilware ICAP1-P and ICAP1 espresso machines are innovative coffee brewing equipment designed to meet the demands of both commercial and home environments. Known for their durability and efficiency, these machines are favored by coffee enthusiasts worldwide.

The ICAP1-P features a single group head system, which allows for precise brewing. With its powerful heating elements, the machine ensures that water is at the ideal temperature for extraction, enhancing the flavor of espresso shots. The ICAP1 also offers similar functionality but includes slightly different controls and specs catering to various user preferences. Both models are made from high-quality stainless steel, ensuring not only a sleek aesthetic but also longevity.

One of the most noteworthy features of the ICAP series is its user-friendly interface. The machines are equipped with easy-to-use pressure gauges, allowing operators to monitor the brewing process effectively. Additionally, these machines come with programmable shot timers, enabling users to achieve consistency with every cup.

The Whipper and Whipper Mini are versatile whipped cream dispensers that complement the espresso experience. The Whipper is known for its large capacity, making it perfect for busy cafes, while the Whipper Mini is ideal for smaller venues or home use. Both devices utilize advanced nitrous oxide technology to create and maintain the perfect whipped cream texture.

Whipper dispensers can maintain their whipped cream for extended periods, thanks to the sealed design that inhibits air exposure. The machines are made of durable, lightweight materials, allowing for easy handling and cleaning. The convenient one-handed operation makes serving quick and efficient, an essential aspect for fast-paced environments.

All these machines, including the ICAP-MINI variant, emphasize energy efficiency, a crucial factor for sustainable operations. The ICAP-MINI is a compact design that does not compromise on performance, making it suitable for locations with limited space. It still retains the same high-quality components seen in the larger models.

In conclusion, the Cecilware line, featuring models like the ICAP1-P, ICAP1, Whipper, Whipper Mini, and ICAP-MINI, stands out in the coffee equipment market for their reliability, user-friendly features, and advanced technology. These machines cater to a wide range of needs, from small coffee shops to high-volume establishments, ensuring that every cup of coffee is brewed to perfection.
Top Page Image Contents