Integra DTR-8.4 Adjusting the Volume of Individual Speakers, Using the Re-EQfunction, Notes

DTR-8.4_En.book Page 62 Thursday, October 16, 2003 11:09 AM

Basic Operation—Continued

Scroll wheel

CH SEL	Level – +
L Night	Re-EQ

Adjusting the Volume of Individual Speakers

With this function you can adjust the volume of each speaker individually. These adjustments are not saved and the previous settings will be resumed when the DTR-8.4 is set to Standby.

Using the Re-EQ function

With the Re-EQ function you can correct a soundtrack whose high-frequency content is too harsh, making it more suitable for home theater viewing.

This function can be used with the following listening modes: Mono, Stereo, All Ch St, Dolby Digital, Dolby Digital EX, Dolby Pro Logic II Movie, DTS, DTS-ES, DTS Neo:6 Cinema, THX Cinema, and THX Surround EX.

1	Press the scroll wheel, and then
	press the [Re-EQ] button.
	Press the button again to turn off the
	Re-EQ function.

Notes:

•The Re-EQ function can also be set on the onscreen setup menus (see page 69).

•When the listening mode is THX, the default setting is On. When the DTR-8.4 is set to Standby, it returns to the default setting.

•When the listening mode is not THX, the default set- ting is Off.

1	Press the scroll wheel, and then
	use the [CH SEL] button to select
	each speaker.
	Speakers are selected in the following
	order.
	Front left	Center	Front right
	Subwoofer		Surr right
	Surr left	Surr back	Surr back
		left	right
2	Use the [Level–] and [Level+] but-

tons to adjust the volume.

The volume can be adjusted from –12 to +12 dB in 1 dB steps (–15 to +12 dB for the subwoofer).

Note:

•You cannot select speakers that are set to No or None on the Speaker Configuration menu (see page 41).

62

Using the Late Night function (Dolby Digital only)

With the Late Night function you can reduce the dynamic range of Dolby Digital material so that you can still hear quiet parts even when listening at low volume levels—ideal for watching movies late at night when you don’t want to disturb anyone.

1	Press the scroll wheel, and then
	press the [L Night] button repeat-
	edly to select:

Off: Late Night function off. Low: Small reduction in dynamic

range.

High: Large reduction in dynamic range.

Notes:

•The Late Night function can also be set on the onscreen setup menus (see page 69).

•The effect of the Late Night function depends on the Dolby Digital material that you are playing, and with some material there will be little or no effect.

•The Late Night function is turned off when the DTR-8.4 is set to Standby.