Integra DTR-8.4 2 3 4 5, 1 2, 2–4 1, Basic Setup—Continued, Speaker Settings, Speaker Impedance

DTR-8.4_En.book Page 40 Thursday, October 16, 2003 11:09 AM

Basic Setup—Continued

Speaker Settings

Speaker Impedance

This section explains how to specify the impedance of your speakers. Check the backs of your speakers or their manuals to determine their impedance.

Note:

Before you change this setting, turn down the volume.

1

2, 3

2–4

1, 5

2

3

4

5

Use the Up/Down []/[ ] but- tons to select “0. Hardware Setup,” and then press the [Enter] button.

The Hardware Setup menu appears.

Use the Up/Down []/[ ] but- tons to select “1. Speaker Imped- ance,” and then press the [Enter] button.

The Speaker Impedance menu appears.

Advanced Menu

0.Hardware Setup

0-1.Speaker Impedance

a.Minimum :6 ohms

Use the Left/Right []/[ ] but- tons to select:

4 ohms: Select if the impedance of any one speaker is between 4 and 6 ohms.

6 ohms: Select if the impedances of all speakers are between 6 and 16 ohms.

Press the [Setup] button.

The setup menu closes.

Notes:

• This procedure can also be performed by using the DTR-8.4’s [Setup] button, []/[ ]/[]/[ ] but- tons, and [Enter] button.

1	Press the scroll wheel, and then
	press the [Setup] button.
	The main menu appears onscreen.

40