Integra DTR-8.4 instruction manual Remote Controller—Continued, Net-TuneMode

DTR-8.4_En.book Page 15 Thursday, October 16, 2003 11:09 AM

Remote Controller—Continued

PTest Tone, CH SEL, Level– & Level+ buttons (44)

These buttons are used to adjust the level of each speaker individually. These functions can be set only with the remote controller. The [Level–] and [Level+] buttons are also used to adjust the volume in Zone 2.

QAudio SEL button (53)

This button is used to select the audio input signal format: analog, digital, or multichannel.

RLight button

This button is used to turn on or off the remote con- troller’s illuminated buttons.

SDirect Tuning button (54)

This button is used with the number buttons to select a radio station by entering its frequency. Press this button first, and then use the number buttons to enter the frequency.

TDisplay

The top line of this LCD display shows the name of the currently selected input source. The bottom line shows the currently selected remote controller mode.

UZone 2 button (87)

This button is used when you want to set the volume and input source for Zone 2.

VInput button (51)

This button is used to select the input source. Press this button first, and then roll the scroll wheel until the name of the input source appears on the display.

WSleep button (52)

This button is used to set the Sleep function. This function can be set only with the remote controller.

XVOL button (51)

This button is used to set the volume of the DTR-8.4.

YSetup/guide button (39)

This button is used to access the onscreen setup menus (OSD) that appear on the TV.

ZMuting button (52)

This button is used to mute the DTR-8.4. This func- tion can be set only with the remote controller.

aAll CH ST button (59)

This button is used to select the All Ch Stereo listen- ing mode.

bStereo button (59)

eL Night button (62)

This button is used to set the Late Night function.

Net-Tune Mode

Net-Tune mode is used with the Net-Tune functions. To select Net-Tune mode, press the [Mode] button, and then roll the scroll wheel until “NET-T” appears on the display.

Note:

While neither the [Input] button nor [Mode] button is illuminated, the scroll wheel changes the input source and remote controller mode simultaneously. (e.g., set the input source to “MSRV/IRD” and the mode to “NET-T.”)

1Number/letter buttons (80)

These buttons are used to enter numbers and letters when searching for music in your network audio server music library.

2Mode button

This button is used with the scroll wheel to select the remote controller modes. Press this button first, and then roll the scroll wheel until “NET-T” appears on the display.

3 Up/Down/Left/Right [ ]/[ ]/[ ]/[ ] &

Enter buttons

These buttons are used to navigate Internet radio and network audio server menus. The Enter button is used to confirm items and to start playback of Net-Tune server tracks.

4CH/Disc button (78)

This button is used to select Internet radio presets.

5 Play [ ] button (80)

This button is used to start playback of network audio server tracks.

6Previous/Next [ ]/[] buttons (79)

The Previous [ ] button is used to select the pre- vious track. During playback it selects the begin- ning of the current track. The Next [ ] button is used to select the next track.

7Pause [] button (79)

This button is used to pause playback.

8Repeat button (80)

This button is used for repeat playback.

9Album button (79)

This button is used to select the Stereo listening mode.

c [ DSP] & [DSP ] buttons (59)

These buttons are used to select the DSP (digital signal processor) listening modes.

dRe-EQ button (62)

This button is used to turn on and off the Re-EQ function.

This button is used to search your network audio server music library by album.

0Playlist button (79)

This button is used to search your network audio server library by playlist.

(continued...)

15