Integra DTR-8.4 instruction manual Basic Operation—Continued, DTS1

DTR-8.4_En.book Page 58 Thursday, October 16, 2003 11:09 AM

Basic Operation—Continued

The following table shows which listening modes can be used with which input signal formats.

				DTS1			Dolby Digital
Input signal format	Analog, PCM	96 kHz PCM	5.1ch		6.1ch	x/2.x	2/0	1/0	Other
						(e.g., 5.1)	(stereo)	(mono)
Source	CD, TV, LD, VHS,	96 kHz/24 bit
	MD, vinyl, radio,		DVD, LD, CD, etc.			DVD, digital cable/satellite, etc.
	cassette, cable,	DVD, etc.
Listening mode	satellite, etc.
Direct	✓	✓
Pure Audio	✓	✓
Stereo	✓	✓	✓		✓	✓	✓		✓
Mono	✓						✓	✓
Theater-Dimensional	✓		✓		✓	✓	✓		✓
Dolby Pro Logic II Movie	✓	✓					✓
Dolby Pro Logic II Music	✓	✓					✓
Dolby Digital						✓			✓
Dolby Digital EX						✓
DTS, DTS 96/24			✓		✓
DTS-ES Discrete					✓
DTS-ES Matrix/DTS+Neo:6			✓
DTS Neo:6 Cinema	✓						✓
DTS Neo:6 Music	✓						✓
THX Cinema	✓		✓		✓	✓	✓		✓
THX Surround EX						✓
Orchestra	✓		✓		✓	✓	✓		✓
Unplugged	✓		✓		✓	✓	✓		✓
Studio-Mix	✓		✓		✓	✓	✓		✓
TV Logic	✓		✓		✓	✓	✓		✓
Enhance	✓		✓		✓	✓	✓		✓
Mono Movie	✓						✓	✓
All Ch Stereo	✓						✓

1.When playing DTS 96 kHz/24-bit program material, if the listening mode is Stereo or DTS, it’s processed at 96 kHz. If any other listening mode is selected, it’s processed at 48 kHz.

Notes:

•Depending on the number of speakers that you connect, and the format of the input signal, you may not be able to select all of the above listening modes.

•If you don’t connect any surround back speakers, or you connect speakers in Zone 2, some listening modes will not be available.

58